Samsung RF263BEAESR User Manual Ver.1.0 (English, French, Spanish) - Page 9

Assemble The Freezer, Drawer, Adjusting The Level, Making Minor, Adjustments Between, Doors - review

Get Samsung RF263BEAESR PDF manuals and user guides View all Samsung RF263BEAESR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 9 highlights

01 setting up 444 After holding and pulling out the top of Freezer Door, remove it at the rail system. How to adjust the level 111 Open the freezer drawer and remove the lower basket. 222 Insert a flat-blade screwdriver (-) into a notch on the left control lever, and turn it count clockwise to level the refrigerator. (You turn the lever clockwise to lower the refrigerator and counterclockwise to raise it.) Make sure there is no scratch at the end of cAuTION Sliding Rail by being dented from the floor. Make sure that you mount the freezer cAuTION basket in the right position when removing / installing the freezer door. Failing to do so may result in the door not opening or closing properly. flat-blade screwdriver(-) Control Lever Both control levers must be touching the cAuTION floor to avoid possible personal injury or property damage because of tipping. If the right side is lower, perform the same procedure, but with the right control lever. It is difficult to remove the cover leg front from the refrigerator, so we do not recommend making small adjustments with the control lever. Instead, refer to the next page for the best way to make minor adjustments to the doors. Assemble the freezer drawer To reattach the drawer after you have moved the fridge to its final location, assemble parts in reverse order. Adjusting the Level Make sure the refrigerator is level so that you can make final adjustments. Use a level to test if the refrigerator is level both side to side and back to front. If the refrigerator is not level, it will not be possible to get the doors perfectly even, which may cause moisture condensation and increased energy bills. Below is an example of how to level the refrigerator if the left side of the refrigerator is lower than the right side. Making minor adjustments between doors Remember, a leveled refrigerator is necessary for getting the doors perfectly even. If you need help, review the previous section on leveling the refrigerator. Fixed part Adjustment part The left door is fixed. To make minor adjustments between doors, adjust only the right door. setting up _09 DA68-02601A(EN+FR+ES)-0.2.indb 9 2012.3.31 9:49:42 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
setting up
_09
01 SETTING UP
After holding and pulling out the top of Freezer
4.
Door, remove it at the rail system.
Make sure there is no scratch at the end of
Sliding Rail by being dented from the floor.
Make sure that you mount the freezer
basket in the right position when removing
/ installing the freezer door. Failing to do
so may result in the door not opening or
closing properly.
ASSEMBLE THE FREEZER
DRAWER
To reattach the drawer after you have moved
the fridge to its final location, assemble parts in
reverse order.
ADJUSTING THE LEVEL
Make sure the refrigerator is level so that you can
make final adjustments. Use a level to test if the
refrigerator is level both side to side and back to
front. If the refrigerator is not level, it will not be
possible to get the doors perfectly even, which
may cause moisture condensation and increased
energy bills. Below is an example of how to level
the refrigerator if the left side of the refrigerator is
lower than the right side.
How to adjust the level
Open the freezer drawer and remove the lower
1.
basket.
Insert a flat-blade screwdriver (-) into a notch
2.
on the left control lever, and turn it count
clockwise to level the refrigerator. (You turn the
lever clockwise to lower the refrigerator and
counterclockwise to raise it.)
Both control levers must be touching the
floor to avoid possible personal injury or
property damage because of tipping.
If the right side is lower, perform the same
procedure, but with the right control lever.
It is difficult to remove the cover leg
front from the refrigerator, so we do not
recommend making small adjustments
with the control lever. Instead, refer to the
next page for the best way to make minor
adjustments to the doors.
MAKING MINOR
ADJUSTMENTS BETWEEN
DOORS
Remember, a leveled refrigerator is necessary
for getting the doors perfectly even. If you need
help, review the previous section on leveling the
refrigerator.
The left door is fixed. To make minor
adjustments between doors, adjust only
the right door.
CAUTION
flat-blade screwdriver(-)
Control Lever
CAUTION
CAUTION
Adjustment
part
Fixed part
DA68-02601A(EN+FR+ES)-0.2.indb
9
2012.3.31
9:49:42 AM