Samsung RF266AASH/XAA User Manual (user Manual) (ver.0.3) (English) - Page 11

Reattaching The Refrigerator Doors

Get Samsung RF266AASH/XAA PDF manuals and user guides View all Samsung RF266AASH/XAA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

01 SETTING UP REATTACHING THE REFRIGERATOR DOORS Assemble the Refrigerator doors 1. R eattach two flat head screws( 1 ) and two hex head screws( 2 ) to the hinge completely. 2. Place the hole in the bottom of the door( 3 )over the lower hinge ( 4 ) Be aware not to miss the hinge cap because it can be easily taken off. 2 1 3 4 3. Insert the upper hinge shaft( 5 ) into the hole on the corner of the Refrigerator door( 6 ). Make sure the hinge is level between the upper hinge hole( 7 ) and the hole of the cabinet( 8 ) and reattach the hinge screws( 9 ) and ground screw( 10 ) by turning in a clockwise direction. Reconnect the wires. 4. Place the front edge of the top table( 11 ) on the front of the upper hinge( 12 ) and reattach with three screws. When reattaching the top table, make sure that the wires are not pressed or damaged by the top table. 7 8 9 10 5 6 11 12 Setting Up _11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
Setting Up
_11
01 SETTING UP
REATTACHING THE REFRIGERATOR DOORS
Assemble the Refrigerator doors
1. Reattach two flat head screws(
1
) and two hex head
screws(
±
) to the hinge completely.
2. Place the hole in the bottom of the door(
²
)over the lower
hinge (
³
)
Be aware not to miss the hinge cap because it can
be easily taken off.
3. Insert the upper hinge shaft(
´
) into the hole on the
corner of the Refrigerator door(
µ
). Make sure the hinge
is level between the upper hinge hole(
) and the hole of
the cabinet(
·
) and reattach the hinge screws(
¸
) and
ground screw(
10
) by turning in a clockwise direction.
Reconnect the wires.
4. Place the front edge of the top table(
11
) on the front of the
upper hinge(
1±
) and reattach with three screws.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the top table.
²
³
´
µ
·
¸
10
1±
11
±
1