Samsung RF266AASH/XAA User Manual (user Manual) (ver.0.3) (English) - Page 15
ADJusting tHe FReezeR DRAweR LeVeL, Freezer Drawer
View all Samsung RF266AASH/XAA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ADJusting tHe FReezeR DRAweR LeVeL Adjustment part 01 setting uP 1. Locate the height-adjuster ( 1 ) in the freezer drawer. Unscrew the four Phillips screws ( ) slightly to loosen the door. 1 2. Loosen the controller screw( ) with a Phillips screwdriver. Freezer Drawer 3. Find the best level to align the door slope. CASE) The slope is about 2mm (0.08inch) as shown below. Slope Reference plane - Rotate down the adjuster-face with +2.0 number to reduce the door slope. - The number of the adjuster to rotate depends on the slope. After adjustment, tighten the screws in reverse order. Setting Up _1
Setting Up
_1´
01 SETTING UP
ADJUSTING THE FREEZER DRAWER LEVEL
1. Locate the height-adjuster (
1
) in the freezer drawer.
Unscrew the four Phillips screws (
±
) slightly to loosen the door.
2.
Loosen the controller screw(
²
) with a Phillips
screwdriver.
3. Find the best level to align the door slope.
After adjustment, tighten the screws (
±
)&(
²
) in reverse order.
CASE)
The slope is about 2mm (0.08inch) as shown below.
-
Rotate down the adjuster-face with +2.0 number to reduce
the door slope.
- The number of the adjuster to rotate depends on the slope.
Slope
Reference
plane
Freezer Drawer
Adjustment part
1
±
²