Samsung RS25H5111SR User Manual Ver.1.0 (English) - Page 12
Separate the water supply line from, the refrigerator, Remove the freezer door
View all Samsung RS25H5111SR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
2. Separate the water supply line from the refrigerator 1. Remove one or two water lines, depending on the model, by pressing each coupler ( 1 ) and pulling the water lines ( 2 ) away. 1. With the Freezer door closed, remove the upper hinge cover ( 1 ) using a screwdriver, and then disconnect the wires by gently pulling them apart ( 2 ). (1) (2) (1) Be careful not to damage the sensor (2) harness with the hinge cover. Your refrigerator may have one or two water lines, depending on the model. If it has two, the lines are different colors. Make sure you match the colors when you re-attach them. 2. Remove the hinge bolts ( 3 ) with a 10 mm Socket Wrench. Remove the ground screw ( 4 ) by turning it counter-clockwise. Take off the upper hinge ( 5 ) in the direction of the arrow. Take care that the door does not fall on you. CAUTION Do not cut the water line. Gently separate it from the coupler. (4) Pressing (3) (5) 3. Remove the freezer door A few things to mention first. • Make sure that you lift the door straight up so the hinges are not bent or broken. • Be careful not to pinch the water tubing and wire harness on the door. • Place doors on a protected surface to prevent scratching or damage. • Is necessary, have two people disassemble the doors. 3. Open the Freezer door, and then remove the door from the lower hinge ( 6 ) by carefully lifting it up ( 7 ). (7) (6) DA68-02981E-01.indb 12 English - 12 14. 1. 20. �� 7:48