Samsung S85 User Manual Ver.1.0 (English) - Page 41
Metering, Drive mode
UPC - 044701008453
View all Samsung S85 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 41 highlights
Metering If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Multi] [Spot] [Center] : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is METERING suitable for general use. Multi : Only the rectangular area in the centre of the LCD monitor will be metered for light. This is suitable when the subject in the centre is exposed correctly, regardless of the back lighting. : Exposure will be calculated based on an average of the avail- able light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for taking a picture of small object like a flower or insects. Ä If the subject is not the centre of the focus area, do not use the spot metering as this may result in an exposure error. In this circumstance, it is better to use exposure compensation. Drive mode You can select continuous shot, and AEB (Auto Exposure Bracketing). [Single] [Continuous] [Motion Capture] [AEB] [Wise Shot] : Take one picture only. : Images will be taken con- tinuously until the shutter button is released. DRIVE : This takes 7 shots per Single second, when the shutter is pressed and held down. After completing the continuous shooting, images are saved and the images play back on the Rear LCD. The maximum number of shots is 30 and the image size is fixed as VGA. : Take three pictures in a series in different exposures: short exposure (-1/3EV), standard exposure (0.0EV), and over exposure (+1/3EV). : Two images are taken at a time. One is taken in the Fill-In Flash mode and the other is taken in the ASR mode. 40 _RECORDING