Samsung SCC-C9302F User Manual - Page 15

CAMERA MENU Organization CAMERA ID In the CAMERA ID menu, you may designate the CAMERA ID to be displayed in the monitor connected to a camera. Set the CAMERA ID menu to ON... and press [ENTER] and the CAMERA ID setup submenu will appear.The CAMERA ID may be created by up to 20 digits by E using alphabets, numbers, and some special texts served by the submenu screen. You may locate the designated CAMERA ID on your own by using the LOCATION... submenu. CAMERA ID IRIS SHUTTER AGC WHITE BAL FOCUS MODE ALARM SET COLOR/BW PRIVACY SPECIAL PRESET EXIT ON... ALC... OFF LOW ATW1 ONEAF ... COLOR... ON... ... ... QUIT PRESS THE ENTER BUTTON. (CAMERA) ABCDE F GH I J K L MNO PQR S T U VWX YZ0 12 3 45 6 78 9 SP SP LOCATION... RET WDR.ZOOM.CAMERA..... IRIS ALC Select ALC... from the IRIS menu and press [ENTER] and the BLC(Back Light Compensation) setup submenu will appear. If you use a general camera to photograph a subject under backlight or bright illumination, the subject will be shown dark on the monitor due to the backlight. BLC(Back Light Compensation) is used to prevent such a backlight problem to secure distinct images under bright illumination. Using the [Left, Right] keys, you can set up BOTTOM..., TOP..., LEFT..., RIGHT..., CENTER... 5 preset areas and the USER...function that can directly set the areas. For example, for the items in the BLC menu, you can confirm the preset BOTTOM area by pressing [ENTER] key in the BOTTOM... status. 28 CAMERA ID ON... (IRIS/ALC) IRIS ALC... SHUTTER OFF AGC LOW WHITE BAL FOCUS MODE ATW1 ONEAF E ALARM SET ... PRESS THE COLOR/BW PRIVACY SPECIAL COLOR... ON... ... ENTER BUTTON. BLC LEVEL OFF (0) ----I---- PRESET EXIT ... QUIT RET (IRIS/ALC) BLC LEVEL RET BOTTOM... (0) ----I---- PRESS THE ENTER BUTTON. BLC For items in the BLC menu, the user can set the size and location of the BLC area by pressing [ENTER] key after put the cursor on USER... using the [Left, Right] key. For SIZE items, you can use the [Up, Down, Left, Right] key to designate the SIZE, and then press the [ENTER] key.You can set the location for areas using the [Up, Down, Left, Right] key in the LOCATION. 29