Samsung SCC-C9302F User Manual - Page 19

CAMERA MENU Organization (MANU) E PRESET 3200K RET FOCUS MODE The FOCUS MODE menu performs MF(Manual Focus), and ONEAF(One Auto Focus). - MF :You can manually adjust the focus. - ONEAF : Focusing will take about 5 seconds in ONEAF mode. When turned off, it is same to the MF mode. CAMERA ID IRIS SHUTTER AGC WHITE BAL FOCUS MODE ALARM SET COLOR/BW PRIVACY SPECIAL PRESET EXIT ON... ALC... OFF LOW ATW1 ONEAF ... COLOR... ON... ... ... QUIT 36 ALARM SET The Alarm Set feature consists of one Alarm In and one Alarm Out, which detects an Alarm In signal from an external sensor and moves to the position pre-defined by the Position Set for the alarming process. Then, it returns to the original position. And it also transfers the Alarm Out signal to external devices. When as much time as the Dwell Time in that position has passed, it will go back to the original position. If no particular position is defined by the Position Set, it will move to the maximum TELE. E CAMERA ID IRIS SHUTTER AGC WHITE BAL FOCUS MODE ALARM SET COLOR/BW PRIVACY SPECIAL PRESET EXIT ON... ALC... OFF LOW ATW1 ONEAF ... COLOR... ON... ... ... QUIT PRESS THE ENTER BUTTON. (ALARM SET) ALARM IN OFF MOTION DET OFF POSITION SET ... ZOOM DWELL TIME 5S ALARM OUT ALL RET MOTION DET is a movement-sensing function that allows you to detect any unintended physical motion for a specified time period. If you set MOTION DET to ON, the system can start to detect a motion, and if any, sounds the alarm for 5 seconds for your notice. Furthermore, you can set the level of motion detection sensitivity. Select MOTION DET to ON and press the [ENTER] button to display the "MOTION DET" setting menu, under which the "AREA" submenu allows you to specify a specific area you want to be monitored by this function. You can set the AREA to PRESET or USER. PRESET will apply the motion-detection function to the default area, while USER will allow you to adjust the size and position of the AREA. With the AREA not blinking on the screen, press the UP, DOWN, LEFT or RIGHT button to adjust the AREA size. With the AREA still not blinking, press the [ENTER] button to start blinking the AREA. Then, use the UP, DOWN, LEFT or RIGHT button to specify the position. You can use the UP, DOWN, LEFT and RIGHT and [ENTER] buttons to adjust the size and specify the position. Press the [ENTER] button again to exit the menu. You can set the sensitivity of detection in SENSITIVITY menu. The higher the value is, more sensitively the detection performs. 37