Samsung SCC-C9302F User Manual - Page 8

Before Installation, Installation Example, Description of Installation HOLEs

Get Samsung SCC-C9302F - Anti-Vandal High-Impact Dome Camera PDF manuals and user guides
UPC - 836164369154
View all Samsung SCC-C9302F manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

Before Installation Before Installation - Make sure the installation location can support over 5 times (approx.5.5 kg)the total weight of the ANTI VANDAL DOME CAMERA (SCC-C9302P). E - Be careful not to let the cable be jammed in inappropriate places or to let the insulation covering of the cable peel off during installation. This may result in malfunction or a fire hazard. - Items may fall and may cause hazards while installing the product.Therefore ensure that no-one is beneath the installation location. Move valuables to a safe place before installation. Installation Example - Able to install on ceilings. - Directly install on a PIPE coming down from the ceiling. - Directly install on walls. - Directly install on a PIPE coming out from a wall. - Install on walls, corners in buildings, columns and other locations using the WALL MOUNT ADAPTOR (SADT -102WM), CORNER MOUNT ADAPTOR (SADT-110CM)and POLE MOUNT ADAPTOR (SADT-100PM). (The above ADAPTOR types are sold separately.) a. Wall Mount Adaptor (SAD-102WM) b. Corner Mount Adaptor (SADT-110CM) c. Pole Mount Adaptor (SADT-100PM) 14 Description of Installation HOLEs A : Use when directly installing on the ceiling or a wall. - Waterproofed only when the SCREW -MACHINE (M5 X L6...)is closed up when not in use. B : Use when directly installing on the JUNCTION BOX E - SCC-C9302P can be assembled into a 4 1/8" DIAMETER ROUND TYPE JUNCTION BOX. SCC-C9302F is assembled outside of the 4 1/8" DIAMETER ROUND TYPE EXTENSION BOX,and then must be covered with the GASKET and COVER. (JUNCTION BOX,GASKET and COVER are sold separately.) C : Use when installing the WALL MOUNT ADAPTOR (SADT - 102WM) - Waterproofed only when the SCREW -MACHINE (M5 X L6...)is closed up when not in use. SCC-C9302P bottom SCC-C9302F bottom A A B B C To additionally connect the ALARM CABLE,remove the rubber stopper,pass the cable through the hole and connect. - The rubber stopper attached to the ALARM CABLE must be properly set onto the CASE to make it waterproof. 15

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
14
15
Before Installation
E
E
Before Installation
Installation Example
Description of Installation HOLEs
- Make sure the installation location can support over 5 times (approx.5.5
kg)the total weight of the ANTI VANDAL DOME CAMERA (SCC-C9302P).
- Be careful not to let the cable be jammed in inappropriate places or to let
the insulation covering of the cable peel off during installation.
This may result in malfunction or a fire hazard.
- Items may fall and may cause hazards while installing the
product.Therefore ensure that no-one is beneath the installation location.
Move valuables to a safe place before installation.
- Able to install on ceilings.
- Directly install on a PIPE coming down from the ceiling.
- Directly install on walls.
- Directly install on a PIPE coming out from a wall.
- Install on walls, corners in buildings, columns and other locations using the
WALL MOUNT ADAPTOR (SADT-102WM), CORNER MOUNT ADAPTOR
(SADT-110CM)and POLE MOUNT ADAPTOR (SADT-100PM).
(The above ADAPTOR types are sold separately.)
a. Wall Mount Adaptor (SAD-102WM)
b. Corner Mount Adaptor (SADT-110CM)
c. Pole Mount Adaptor (SADT-100PM)
A : Use when directly installing on the ceiling or a wall.
- Waterproofed only when the SCREW -MACHINE (M5 X L6...)is closed
up when not in use.
B : Use when directly installing on the JUNCTION BOX
- SCC-C9302P can be assembled into a 4 1/8" DIAMETER ROUND
TYPE JUNCTION BOX.
SCC-C9302F is assembled outside of the 4 1/8" DIAMETER ROUND
TYPE EXTENSION BOX,and then must be covered with the GASKET
and COVER.
(JUNCTION BOX,GASKET and COVER are sold separately.)
C : Use when installing the WALL MOUNT ADAPTOR (SADT - 102WM)
- Waterproofed only when the SCREW -MACHINE (M5 X L6...)is closed
up when not in use.
SCC-C9302P bottom
SCC-C9302F bottom
To additionally connect the ALARM CABLE,remove the rubber
stopper,pass the cable through the hole and connect.
- The rubber stopper attached to the ALARM CABLE must be
properly set onto the CASE to make it waterproof.
A
A
C
B
B