Samsung SCX-5639FR User Manual (user Manual) (ver.1.01) (English) - Page 192

Wireless network setup 2. Using a network-connected machine 32 • With a USB cable: You can simply set up a wireless network using the program on the supplied software CD. Only Windows and Macintosh operating systems are supported (see "Setup using Windows" on page 34 or "Setup using Macintosh" on page 42). You can also install a wireless network in Printer Settings Utility with a USB cable after installing the driver (Windows and Macintosh operating systems are supported). • With a network cable: You can set up a wireless network using the SyncThru™ Web Service program (see "Using a network cable" on page 48). 15   Using the menu button Before starting, you will need to know the network name (SSID) of your wireless network and the network key if it is encrypted. This information was set when the access point (or wireless router) was installed. If you do not know about your wireless environment, please ask the person who set up your network. After completing the wireless network connection, you need to install a machine driver to print from an application (see "Installing driver over the network" on page 16). 1 Select (Menu) > Network > OK > Wireless > OK > WLAN Settings > OK on the control panel. 2 Press the OK to select the setup method you want. • Wizard: The wireless network interface card in your machine searches for wireless networks in the area and shows the results. • Custom: You can configure the wireless settings according to your needs. Wizard mode 1 The wireless network interface card on your machine searches for wireless networks in the area and shows the results. 2 Press Search List > OK > select the network > OK. You can select a network using SSID.