Samsung SCX 6322DN Service Manual - Page 110

Setting Guide 7.2 Understanding the Status LED The Status LED on the control panel shows the status of your machine. See the table below to know your machine's status. Status Off Green Red On Blinking On Blinking Description The machine is off-line. The machine is in Power Save mode. When data is received, or any button is pressed, it switches to on-line automatically. The machine is on-line and can be used. When the backlight slowly blinks, the machine is receiving data from the computer. When the backlight fast blinks, the machine is printing data. The toner cartridge is totally exhausted. Remove the old toner cartridge and install a new one. The drum cartridge is totally exhausted. Remove the old drum cartridge and install a new one. A paper jam has occurred. To solve the problem. The front cover is open. Close the front cover. There is no paper in the tray. Load paper in the tray. The toner cartridge installed is not a genuine cartridge, and you selected Stop at the NonGenuine Toner prompt. The lifespan of the toner cartridge is reached, and you selected Stop at the Toner Exhausted prompt. The machine has stopped due to a major error. Check the display message. A minor error occurs and the machine is waiting an error to be cleared. Check the display message. When the problem is cleared, the machine resumes. The toner cartridge installed is not a genuine cartridge, and you selected Continue at the NonGenuine Toner prompt. The lifespan of the toner cartridge is reached, and you selected Continue at the Toner Exhausted prompt. The toner cartridge is low. Order a new toner cartridge. You can temporarily improve print quality by redistributing the toner. 7-4 Service Manual Samsung Electronics