Home » Samsung Manuals » Mobile Phones » Samsung SGH-E317 » Manual Viewer

Samsung SGH-E317 User Manual (ENGLISH) - Page 26

You can use the phone while the battery is charging, but, this causes the phone to charge more

Add to My Manuals
Save this manual to your list of manuals

Page 26 highlights

You can use the phone while the battery is charging, but this causes the phone to charge more slowly. Note: You must fully charge the battery before using your phone for the first time. A discharged battery is fully recharged in approximately 200 minutes. 1. With the battery in position on the phone, plug the connector of the travel adapter into the jack at the bottom of the phone. 2. Plug the adapter into a standard AC wall outlet. 3. When charging is finished, unplug the adapter from the power outlet and disconnect it from the phone by pressing the gray Getting Started 26

Section	Page
Intellectual Property	2
Samsung Telecommunications America, L.P.	3
Table of Contents	5
Unpacking	11
1. Your package contains the following items:	11
Your Phone	13
Phone Layout	13
Display	17
Camera	20
Service Light	21
Getting Started	23
Installing the SIM Card	23
1. If necessary, turn off the phone by holding down the key until the power-off image displays.	23
2. Remove the battery. To do so:	23
3. Slide the SIM card into the SIM card socket so that it locks the card into place. Make sure the gold contacts of the card face into the phone.	24
4. Replace the battery so that the tabs on the end align with the slots at the bottom of the phone.	25
5. Press the battery until it clicks into place. Make sure that the battery is properly installed before switching the phone on.	25
Charging a Battery	25
1. With the battery in position on the phone, plug the connector of the travel adapter into the jack at the bottom of the phone.	26
2. Plug the adapter into a standard AC wall outlet.	26
3. When charging is finished, unplug the adapter from the power outlet and disconnect it from the phone by pressing the gray buttons on both sides of the connector and pulling the connector out.	26
Switching the Phone On/Off	27
1. Open the folder.	27
2. Press and hold the key until the phone switches on.	27
3. If the phone asks you to enter the phone password, enter the password and press the OK soft key. The phone password is factory set to “00000000.” For further details, see “Change Password” on page 159.	27
4. If the phone asks for a PIN, enter the PIN and press the OK soft key. For further details, see “Change PIN” on page 159.	28
5. When you wish to switch the phone off, press and hold the key until the power-off image displays.	28
Call Functions	29
Making a Call	29
1. Press and hold the key. The + character appears.	29
2. Enter the country code, area code, and phone number and press the key.	29
1. If you have typed characters on the display, press the key to return to Idle mode.	30
2. Press the key to display a list of the last numbers in the order you made or received.	30
3. Use the Up and Down keys to scroll through the numbers until the number you want highlights.	31
Adjusting the Volume	31
Answering a Call	32
1. If necessary, open the folder. Press the key or the Accept soft key to answer the incoming call.	32
2. End the call by closing the folder or pressing the key.	33
Viewing Missed Calls	33
1. If the phone is closed, open the folder.	33
2. Press the View soft key.	33
1. Press the Options soft key.	34
2. Press the Up or Down key to highlight the Edit option.	34
3. Press the Select soft key.	34
4. Change the number.	34
1. Press the Options soft key.	34
2. If necessary, press the Up or Down key to highlight the Delete option.	34
3. Press the Select soft key.	34
Quickly Switching to Silent Mode	35
Selecting Functions and Options	37
1. Press the appropriate soft key.	38
Phonebook	39
Storing a Number with a Name	39
1. Enter the number you want to store.	39
2. To save the number, press the Save soft key.	39
3. Select an icon to identify the category of the number to be stored. Three categories are available:	39
4. Choose either SIM Memory or Phone Memory to store the number.	39
5. Enter a name and press the OK soft key.	39
6. Press the OK soft key to store the name and number. The new Phonebook entry displays.	40
1. At the idle screen, press the Name soft key.	40
2. Scroll to New Entry by pressing the Up or Down key and press the Select soft key.	40
3. Select an icon to identify the category of the number to be stored by pressing the Left or Right key, and press the Select soft key.	40
4. Choose either SIM Memory or Phone Memory to store the number.	40
5. Enter a name and press the OK soft key.	40
6. Enter a number or address you want to store and press the Save soft key.	41
Using Phonebook Entry Options	41
Dialling a number from Phone Book	42
1. In Idle mode, enter the location number for the phone number you want to dial and press the key.	42
2. You can press the Up or Down key to find other numbers on the list.	42
3. Press the Dial soft key, key, or key when you have selected the number you want.	42
1. In Idle mode, press and hold the 0 key. A + appears.	43
2. Enter the location number of the phone number you want and press the key.	43
3. The list of entries in the phone’s memory appears.	43
4. You can press the Up or Down key to find other numbers on the list.	43
5. Press the Dial soft key, key, or key when you have selected the number you want.	43
1. At the idle screen, press the Name soft key.	43
2. Press the Select soft key when Search highlights. You are asked to enter a name.	43
3. Enter the first few letters of the name.	43
4. Once you have found the entry, press the key to dial the number, or press the Options soft key to access the Phonebook entry options; for further details, see page 41.	44
1. When the idle screen displays, press the Name soft key.	44
2. Scroll to Group Search by pressing the Up or Down key and press the Select soft key. You are asked to enter a group name.	44
3. Enter the first few letters of the group name that you wish to find.	44
4. Scroll to the group you want by pressing the Up or Down key and press the View soft key.	44
5. Once you have found the entry, press the key to dial the number, or press the Options soft key to access the Phonebook entry options; for further details, see page 41.	45
Editing a Caller Group	45
1. When the idle screen displays, press the Name soft key.	45
2. Scroll to Group Edit by pressing the Up or Down key and press the Select soft key.	45
3. Scroll through the group list by pressing the Up or Down key.	45
4. When the group you want highlights, press the Options soft key.	45
5. Select each option and change the settings, as required. The following options are available:	45
6. When you are finished, press the or key.	45
Speed-dialing	46
1. At the idle screen, press the Name soft key.	46
2. Scroll to Speed Dial by pressing the Up or Down key and press the Select soft key.	46
3. Select the key to which you wish to assign the speed-dialing number, from the - keys, and press the OK soft key.	46
4. Select a Phonebook entry and press the View soft key.	46
5. Select a number if the entry has more than one number, by pressing the Up or Down key and press the Select soft key.	46
6. Once you have assigned a number to the selected key, you can use the following options by pressing the Options soft key:	46
7. When you are finished, press the or key.	47
Checking the Memory Status	47
1. When the idle screen displays, press the Name soft key.	47
2. Select the Memory Status option.	47
3. Press the Up or Down key to view the number of existing and remaining entries in the card and phone’s memory.	47
4. When you are finished, press the key.	47
Deleting All of the Phone Book Entries	47
1. When the idle screen displays, press the Name soft key.	47
2. Scroll to Delete All by pressing the Up or Down key and press the Select soft key or key.	47
3. To place a check mark by the memory location you want to empty, All, SIM Memory, or Phone Memory, press the key.	47
4. Press the Delete soft key to delete the entries in the selected memory location.	48
5. Enter the phone password and press the OK soft key or key.	48
6. When the confirmation message appears, press the Yes soft key or key.	48
7. When you have finished, press the key.	48
Using the Service Dialing Numbers	48
1. When the idle screen displays, press the Name soft key.	48
2. Select the SDN option by pressing the Up or Down key and press the Select soft key or key.	48
3. To dial the number displayed, press the Dial soft key, key, or key.	48
Entering Text	49
Changing the Text Input Mode	50
Using T9 Mode	51
1. When you are in T9 mode, start entering a word by pressing the to keys. Press each key only once for each letter.	51
2. Enter the whole word before editing or deleting the keystrokes.	51
3. When the word displays correctly, go to step 4.	51
4. Put a space by pressing the key and start entering the next word.	51
1. After pressing the keys corresponding to the word you want to add, press the 0 key or Up or Down key to display the alternative words.	52
2. When you press the 0 key or Up or Down key at the last alternative word, the display shows Add on the bottom line. Press the Add soft key or the key .	52
3. If necessary, clear the word using the C key and enter the word you want to add using Alphabet mode.	52
4. Press the OK soft key or the key.	52
Using the Upper/Lower-Case Alphabet Mode	53
1. Press the key labeled with the letter you want:	53
2. Select the other letters in the same way.	53
Using Number Mode	54
Using Symbol Mode	54
Options During a Call	55
Using the Menu Functions	55
1. Press the Options soft key.	55
2. Press the OK soft key when the Menu option highlights.	55
3. Press the Up or Down key to scroll through the menu list.	55
4. When the menu you want highlights, press the Select soft key.	55
5. If the selected menu has sub-options, repeat steps 3 and 4.	55
Putting a Call on Hold	55
1. Enter the phone number that you wish to dial or look it up in Phonebook.	55
2. Press the key to dial the second call.	55
1. Put the current call on hold by pressing the Hold soft key.	56
2. Make the second call in the normal way.	56
Switching the Microphone Off (Mute)	56
1. Press the Options soft key.	56
2. If necessary, press the Down key to highlight the Mute option.	56
3. Press the OK soft key. The other person can no longer hear you.	56
1. Press the Options soft key.	56
2. If necessary, press the Down key to highlight the Unmute option.	56
3. Press the OK soft key. The other person can hear you again.	56
Muting/Sending Key Tones	57
Sending Sequence of DTMF Tones	57
1. Press the Options soft key.	57
2. Highlight the Send DTMF option.	57
3. Press the OK soft key.	57
4. Enter the required number and press the OK soft key.	57
Searching for a Number in Phonebook	57
1. Press the Options soft key.	57
2. Press the Down key to highlight the Phonebook option.	57
3. Press the OK soft key.	57
4. Enter the name that you wish to find.	57
5. To view the highlighted entry, press the View soft key.	58
Call Waiting	58
1. Press the key to answer the incoming call. The first call is automatically put on hold.	58
2. To switch between the two calls, press the Swap soft key.	58
3. To end a call on hold, press the Options soft key and select the End Held Call option.	58
Making a Multi-party Call	58
1. Call the first participant in the normal way.	58
2. Call the second participant in the normal way. The first call is automatically put on hold.	58
3. To join the first participant to the multi-party call, press the Options soft key and select Join. Press the OK soft key.	59
4. To add a new person to the multi-party call, call the person in the normal way and then press the Options soft key. Select the Conference option and press the OK soft key.	59
1. Press the Options soft key and choose the Select one option. Press the OK soft key.	59
2. Highlight a person by pressing the Up or Down key, and press the Select soft key or the key.	59
3. When the Private option highlights, press the OK soft key.	59
4. To return to the multi-party call, press the Options soft key and select Conference. Press the OK soft key.	59
1. Press the Options soft key and choose the Select one option. Press the OK soft key.	59
2. Highlight a person by pressing the Up or Down key, and press the Select soft key or the key.	59
3. Press the Down key to select the Remove option and press the OK soft key.	60
4. When you want to end the multi-party call, close the folder or press the key.	60
Using the Menus	61
Accessing a Menu Function by Scrolling	61
1. In Idle mode, press the Menu soft key.	61
2. Scroll using the navigation keys to reach a main menu, Phone Settings for example. Press the Select soft key or the key to enter the menu.	61
3. If the menu contains sub-menus, Language for example, you can access them by scrolling and pressing the Select soft key or the key.	61
Accessing a Menu Function by Using Its Shortcut	62
4. Press the Menu soft key.	62
5. Press the key for Phone Settings.	62
6. Press the key for Language.	62
List of Menu Functions	62
Recent Calls	71
Missed Calls	71
Calls Received	71
Calls Made	72
Voice Mail	72
Delete All	72
Call Time	73
Messaging	75
Text Messages	75
1. When the Message icon () appears, you have received new text messages. When the memory is full, an error message displays and you cannot receive any new messages. Use the Delete option in each message box to delete obsolete messages.	75
1. Select a message from the list and press the View soft key or the key to read the message contents.	75
2. To scroll through the contents, press the Up or Down key.	76
3. To scroll to the previous message press the key or press the key for the next message.	76
1. Select a message from the list and press the View soft key or the key to read the message contents.	77
2. To scroll through the contents, press the Up or Down key.	77
3. To scroll to the previous message press the key or press the key for the next message.	77
1. Create your message.	78
2. When you finish entering your message, press the Options soft key or the key. The following options are available:	78
3. Select Send Only or Save and Send, and press the Select soft key or the key.	78
4. If you select a save option, select a location and press the OK soft key or the key.	78
5. If you select the Save and Send option, enter a destination number and press the OK soft key or the key. The message is sent.	78
6. Press the OK soft key or the key to confirm. Otherwise, press the Exit soft key to return to the text message screen.	79
1. Create your message.	79
2. Press the Options soft key or the key.	79
3. Select one of the following options by using the Up and Down keys and pressing the Select soft key or the key.	79
4. Complete the message, and send or save it by following the procedure from step 2 on page 78.	80
Delete All	82
Multimedia Messages	84
1. Press the View soft key to view the message.	84
2. To scroll through the message information, press the Up or Down key.	85
1. Select a message and press the Select soft key to view the message.	86
2. To scroll through the message, press the Up or Down key.	86
1. Select a message and press the Select soft key to view the message contents.	86
2. To scroll through the message, press the Up or Down key.	86
1. Enter the subject of your message and press the OK soft key or the key.	88
2. When Add Here highlights, press the Options soft key or the key and add the message contents using one of the following options:	88
3. When the added content displays, press the Down key to highlight Add Here.	89
4. Repeat steps 2 and 3 until you finish creating your message.	89
5. If you want to change the added items, press the Up or Down key to highlight one and press the Options soft key. The following options are available:	89
6. When you finish creating the message, choose Send from the options and press the Select soft key.	90
7. Select a destination type, To, Cc or Bcc and press the Select soft key.	90
8. Choose one of the following options and press the Select soft key:	90
9. If you want to send the message to multiple destinations, select Add Destination and press the Select soft key.	90
10. Repeat steps 7 to 10. You can enter up to 11 destinations.	90
11. If you want to edit the destinations, select one and press the Select soft key. You can change or delete it.	90
12. When you are finished entering the destinations, select Send Message and press the Select soft key. Your phone sends the message.	90
1. Scroll through the template list using the Up and Down keys.	91
2. When the message template you want highlights, press the Select soft key or the key.	91
3. Press the OK soft key or the key to access the following options, or the display automatically shows the options after a specified time:	91
4. Press the key to return to Idle mode.	91
Delete All	91
Memory Status	92
Instant Messaging (IM)	94
1. Scroll right on the navigation key	94
2. Use the navigation keys to highlight the AIM. Press the Select soft key.	94
3. Enter your Screen name and Password. Press the Sign on soft key.	94
4. If the sign-on was successful, you will see Welcome, followed by a list of options.	94
Send an Instant Message	95
1. From the AIM main menu, scroll to and select Buddy List.	95
2. Use the navigation keys to highlight a buddy and press the Select soft key or key.	95
Conversations	96
Blocked List	96
Saved history	96
Sign Off	96
1. Scroll right on the navigation key to highlight the ICQ icon. Press the Select soft key or key.	97
2. Enter your ICQ number and Password. Press the Connect soft key. The Contact List screen displays with the My Status option highlighted.	98
3. Press the Select soft key. The following options are displayed.	98
Conversations	98
Blocked List	98
Saved history	99
Disconnect	99
E-Mail Messages	99
1. Press the Select soft key when Check E-Mail highlights.	100
2. Select the e-mail account from which you want to retrieve e- mails and press the Select soft key.	100
3. Scroll to an e-mail from the list and press the Select soft key.	100
4. Press the Options soft key.	100
5. Select Retrieve and press the Select soft key.	101
6. To scroll through the text, press the Up or Down key.	101
1. Select an e-mail from the list and press the Select soft key to read it.	102
2. To scroll through the contents, press the Up or Down key.	102
1. Enter the subject of your e-mail and press the OK soft key or key.	103
2. Enter the e-mail text and press the Options soft key or key.	103
3. Press the Up or Down key to select an option and press the Select soft key or key.	103
4. When you are finished creating the e-mail, choose Send from the options and press the Select soft key or key.	104
5. Select a destination type, To, Cc or Bcc and press the Select soft key or key.	104
6. Choose one of the following options and press the Select soft key:	104
7. Enter an e-mail address and press the OK soft key, or select one from the Phone Book or Recent Log list and press the Select soft key or key.	104
8. To add another address, select To, Cc or Bcc and press the Select soft key or key.	104
9. When there is an e-mail address already entered in the selected destination type, press the Select soft key when Add Destination highlights. Repeat from steps 6 to 8.	105
10. When you are finished adding the destinations, press the Select soft key or key when Send E-Mail highlights.	105
Push Message	108
Network Services	111
Call Forwarding	111
1. Select a call forwarding option by pressing the Up or Down key and then press the Select soft key.	111
2. Select the type of calls, voice or data, by pressing the Up or Down key and then press the Select soft key.	111
3. Enter the number to which the calls are to be forwarded and press the OK soft key.	112
Call Barring	112
1. Select a call barring option by pressing the Up or Down key and then press the Select soft key.	113
2. Select the type of calls, voice or data, by pressing the Up or Down key and then press the Select soft key.	113
3. Press the Activate soft key to confirm your settings.	113
4. Enter your call barring password supplied by your service provider.	113
5. Select the call barring option to be deactivated.	113
6. Select the type of calls to which this option applies.	113
7. Press the Deactivate soft key.	113
8. Enter your call barring password supplied by your service provider.	113
Call Waiting	114
1. Select the type of calls, voice or data, to which the call waiting option is to be applied by pressing the Up or Down key and then press the Select soft key.	114
2. You can activate or deactivate the call waiting feature using the Activate or Deactivate soft key respectively.	114
Network Selection	114
1. When Network Selection displays, press the Select soft key.	115
2. Press the Up or Down key until the appropriate option highlights, then press the OK soft key.	115
3. Press the Up or Down key until the network you want highlights and then press the OK soft key.	115
Caller ID	115
Closed User Group (CUG)	115
Camera	119
Take Photos	119
1. Accessing the Take Photos menu turns the camera on. The image to be captured appears on the display.	119
2. Adjust the image by aiming the camera at the subject.	119
3. Press the left soft key to use the camera options.	119
4. Press the Camera key on the right side of the phone or the key to take the photo.	120
5. Press the Save soft key.	120
1. Close the folder.	123
2. To turn the camera on, press and hold the Camera key on the right side of the phone.	123
3. Adjust the image by aiming the camera at the subject.	123
4. Press the Camera key to take the photo.	123
My Photos	123
Delete All	124
Memory Status	124
MEdia Mall	125
Shop Ringtones	125
1. Use the Select soft key to choose the option.	125
2. Use the Up and Down navigation keys to move to your desired option and press the Select soft key.	125
3. Continue to navigate through the menu options.	125
Shop Games	125
1. Use the Select soft key to choose the option.	125
2. Use the Up and Down navigation keys to move to your desired option and press the Select soft key.	125
3. Continue to navigate through the menu options.	125
Shop Graphics	126
1. Use the Select soft key to choose the option.	126
2. Use the Up and Down navigation keys to move to your desired option and press the Select soft key.	126
3. Continue to navigate through the menu options.	126
Shop Multimedia	126
1. Use the Select soft key to choose the option.	126
2. Use the Up and Down navigation keys to move to your desired option and press the Select soft key.	126
3. Continue to navigate through the menu options.	126
Shop Applications	126
1. Use the Up and Down navigation keys to move to your selection and press the Options soft key. Press the Select soft key to continue or Back to make another selection.	126
2. Use the Up and Down navigation keys to move to your desired option and press the Select soft key.	126
3. Continue to navigate through the menu options.	127
MEdia Home	127
1. Use the Options soft key to choose your option.	127
2. Use the Up and Down navigation keys to move to your desired option and press the Options then Select or Back soft key.	127
3. Continue to navigate through the menu options.	127
Sound Settings	129
Ring Tone	129
Ring Volume	129
Shop Ringtones	129
Alert Type	129
Keypad Tone	130
Message Tone	130
Folder Tone	132
Power On/Off	132
Alerts on Call	132
Extra Tones	132
Applications	135
Alarm	135
1. Choose the type of alarm to be set and press the Select soft key or the key.	135
2. Enter the time for the alarm to sound.	135
3. Press the OK soft key or the key..	136
4. Choose AM or PM using the Up and Down keys and press the OK soft key or the key.	136
5. If you select Wake-up Call in step 1, select the repeat option, Monday to Friday or Monday to Saturday and press the Select soft key or the key.	136
Calendar	136
1. Select a date on the calendar, using the Navigation keys.	137
2. Press the soft key.	137
3. Enter your memo and then press the OK soft key or the key.	137
4. If you want the alarm to ring on the chosen day, press the Yes soft key or the key.	137
5. If you pressed the Yes soft key or the key, set the time for the alarm and press the OK soft key or the key.	138
6. Select either AM or PM and press the Select soft key.	138
Time & Date	139
1. Select the city corresponding to your time zone by pressing the Left or Right key one or more times. The local date and time display.	139
2. Press the Set soft key or the key.	139
Calculator	140
1. Enter the first number using the numeric keys.	140
2. Press the right soft key until the symbol you want displays: + (addition), - (subtraction), * (multiplication), / (division).	140
3. Enter the second number.	140
4. To view the result, press the key.	140
5. Repeat steps 1 to 4 as many times as required.	140
To Do List	140
1. If this is your first or only to do, press the New soft key, otherwise press the Options soft key.	140
2. Press the New soft key.	140
3. Enter the first task.	140
4. Press the OK soft key or the key.	141
5. Select high, normal or low priority using the Up or Down key and press the Select soft key or the key.	141
6. Enter your deadline and press the OK soft key or the key.	141
Voice Memo	143
1. To start recording, press the Record soft key.	144
2. Record a memo by speaking into the microphone.	144
3. When you press the Stop soft key or if the recording time expires, the following options display:	144
4. To save the memo, choose Save from the options and press the Select soft key.	144
5. Press the C key to clear the default name, if necessary, and enter a name for the memo.	144
6. Press the OK soft key.	144
7. Press the Options soft key to use the following memo options:	144
8. To exit, press the C or key.	145
Currency Exchange	145
1. Enter the current exchange rate of your source currency and press the OK soft key or the key.	145
2. Enter the amount to convert and press the OK soft key or the key.	146
3. Press the Exit soft key to exit the currency converter.	146
My MEdia	147
MEdia Net	147
Exiting the WAP Browser	147
Navigating the WAP Browser	148
Entering Text in the WAP Browser	148
1. Set the cursor to the right of the character(s) to be corrected.	149
2. Press the key as required.	149
3. Enter the correct character(s).	149
Selecting and Using Menu Options	149
1. Press the Menu soft key. A menu displays.	149
2. Highlight a menu by pressing the Up and Down keys.	149
3. Select the option by pressing the Select soft key or the key.	149
4. If necessary, select a secondary option using the Up and Down keys, and press the Select soft key to confirm.	149
1. Select an empty location and press the Options soft key or the key.	150
2. Enter the address and press the Enter soft key or the key.	151
3. Enter a name for the favorite item and press the Enter soft key or the key.	151
Games	152
Audio	153
Graphics	153
Delete All	153
Memory Status	154
Phone Settings	155
Display Settings	155
1. Use the Up or Down navigation key to highlight the wallpaper list. Press the Select soft key or the key.	156
2. Use the Up or Down key to select the image you want. Press the Select soft key or the key.	156
3. When the image displays, press the Select soft key.	156
Greeting Message	157
Own Number	158
Language	158
Security	158
PIN Check	158
Change PIN	159
Phone Lock	159
Change Password	159
Privacy	160
1. Press the OK soft key to lock the marked items.	160
2. When the phone asks for the password, enter the password and press the OK soft key or key.	160
SIM Lock	160
FDN Mode	161
Change PIN2	161
Extra Settings	161
Short Cut	162
1. Select the key to be used as a shortcut key by pressing the Up or Down key, and press the Select soft key or the key.	162
3. Select the menu to be assigned to the key by pressing the Up or Down key.	163
4. Press the Select soft key or the key to save the selection.	163
TTY Settings*	163
1. From the menu screen select Phone Settings (Menu 9).	163
2. Press the 9 key to access this function.	163
3. Enter 4-T-T-Y or (4889) in the password field and press the OK soft key.field.	163
Reset Settings	164
1. Select the Reset Settings menu.	164
4. Enter the 4-8 digit password and press the OK soft key or the key.	164
Solving Problems	165
Access Codes	169
Phone Password	169
PIN	170
PUK	170
1. Enter the PUK and press the OK soft key or the key.	170
2. Enter a PIN of your choice and press the OK soft key or the key.	170
3. When the Confirm New PIN message displays, enter the same code again and press the OK soft key or the key.	170
PIN2	171
PUK2	171
1. Enter the PUK2 and press the OK soft key or the key.	171
2. Enter a new PIN2 of your choice and press the OK soft key or the key.	171
3. When the Confirm PIN2 message displays, enter the same code again and press the OK soft key.	171
Health and Safety Information	173
Exposure to Radio Frequency (RF) Signals	173
For Body Operation	175
Precautions When Using Batteries	176
Road Safety	177
1. Get to know your wireless phone and its features, such as speed dial and redial. If available, these features help you to place your call without taking your attention off the road.	177
2. When available, use a hands-free device. If possible, add an extra layer of convenience and safety to your wireless phone with one of the many hands-free accessories available today.	177
3. Position your wireless phone within easy reach. Be able to access your wireless phone without removing your eyes from the road. If you get an incoming call at an inconvenient time, let your voice mail answer it for you.	177
4. Let the person you are speaking with know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather conditions. Rain, sleet, snow, ice and even heavy traffic can be hazardous.	178
5. Do not take notes or look up phone numbers while driving. Jotting down a To Do list or flipping through your phonebook takes your attention away from your primary responsibility, driving safely.	178
6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to...	178
7. Do not engage in stressful or emotional conversations that may be distracting. Make the people with whom you are talking aware that you are driving and suspend conversations that have the potential to divert your attention from the road.	178
8. Use your wireless phone to call for help. Dial the emergency number in the case of fire, traffic accident or medical emergencies. Remember, it is a free call on your wireless phone!	178
9. Use your wireless phone to help others in emergencies. If you see a car accident, crime in progress or other serious emergency where lives are in danger, call the emergency number, as you would want others to do for you.	178
10. If you see a broken-down vehicle posing no serious hazard, a broken traffic signal, a minor traffic accident where no one ap...	178
Operating Environment	179
Electronic Devices	179
Potentially Explosive Environments	181
Emergency Calls	181
1. If the phone is not on, switch it on.	182
2. Key in the emergency number for your present location (for example, 911 or other official emergency number). Emergency numbers vary by location.	182
3. Press the key.	182
Other Important Safety Information	182
Care and Maintenance	183
Acknowledging Special Precautions and the FCC and Industry Canada Notice	184
1. This device may not cause harmful interference, and	185
2. This device must accept any interference received.	185
Appendix A: CERTIFICATION INFORMATION (SAR)	187
Appendix B: Guide to Safe and Responsible Wireless Phone Use	191
1. Get to know your wireless phone and its features such as speed dial and redial. Carefully read your instruction manual and le...	192
2. When available, use a hands free device. A number of hands free wireless phone accessories are readily available today. Wheth...	192
3. Position your wireless phone within easy reach. Make sure you place your wireless phone within easy reach and where you can g...	192
4. Suspend conversations during hazardous driving conditions or situations. Let the person you are speaking with know you are dr...	192
5. Do not take notes or look up phone numbers while driving. If you are reading an address book or business card, or writing a “...	193
6. Dial sensibly and assess the traffic; if possible, place calls when you are not moving or before pulling into traffic. Try to...	193
7. Do not engage in stressful or emotional conversations that may be distracting. Stressful or emotional conversations and drivi...	193
8. Use your wireless phone to call for help. Your wireless phone is one of the greatest tools you can own to protect yourself an...	193
9. Use your wireless phone to help others in emergencies. Your wireless phone provides you a perfect opportunity to be a “Good S...	193