Samsung SGH-P310 Service Manual - Page 20

5-4. Assembly 1 Main Electrical Parts List 2 3 connectors Insulation Tape 1) As seen above, insert an each FPCB in the front set to the connectors in PBA, ※ caution 1) Each connector should be certainly clicked along the marked line 2) Be careful of the possible damage on FPCB 3 Bolt A(1.4*3) Bolt B(1.4*4) 1) Stick the insulation tape on the connectors. 2) Fold up the PBA and put it on the front set. ※ caution 1) Edge of PBA should be well-fit to the hook in LCD bracket. 4 1) Place the MIC as the picture below ※ caution 1) Check the MIC FPCB is OK 1) Put the MIC COVER and CREW 2) Attach KEYPAD 3) Press the KEYPAD not to be detached ※ caution 1) Check the KEY PAD is OK 5-6 SAMSUNG Proprietary-Contents may change without notice This Document can not be used without Samsung's authorization