Samsung SH-S182M User Manual (user Manual) (ver.1.0) (English) - Page 15
Connecting the Jumper to the Master/Slave Port
View all Samsung SH-S182M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
a : Master Drive (Select the MA jumper) c : HDD e : Primary 1 b : Slave Drive (Select the SL jumper) d : Motherboard f : Secondary 1 Connecting the Jumper to the Master/Slave Port Connect the jumper to the slot in the back of the DVD Writer. When you connect the jumper to MA (Master), the drive runs as the master, and when you connect it to SL (Slave), the drive runs as the slave. When you connect it to CS (CSEL), you can control the device using the host interface signal CSEL. (Connection to MA is recommended.) MA : Master SL : Slave CS : Cable Select(CSEL)
a
: Master Drive (Select the MA jumper)
b
: Slave Drive (Select the SL jumper)
c
: HDD
d
: Motherboard
e
: Primary 1
f
: Secondary 1
Connecting the Jumper to the Master/Slave Port
Connect the jumper to the slot in the back of the DVD Writer.
When you connect the jumper to MA (Master), the drive runs as the master, and when you connect it
to SL (Slave), the drive runs as the slave.
When you connect it to CS (CSEL), you can control the device using the host interface signal CSEL.
(Connection to MA is recommended.)
MA
: Master
SL
: Slave
CS
: Cable Select(CSEL)