Samsung SHR-5042 User Manual - Page 33

05 MENU SETUP Screen Setup Screen Setup 128 128 128 Default Apply All OK Cancel This is the screen that sets the Brightness/Contrast/Color values for the camera image of each channel. Place the cursor on the the desired channel for adjustment and select it to set the Brightness/Contrast/ Color values. The selected channel appears within the PIP zone on the right. The adjustment can be made from '0' to '255' using the  PS  button. If you press ""QQMZ
"MM", the values for the last updated channel are copied to entire channels. If you press "%FGBVMU", the values for the current channel are reset with '128'. MONITORING The details of the monitoring menu are as follows: SHR-5042/5040 MENU System ► Camera ► Monitoring Record Mode ► Live Mode Spot Mode Event Record ► Record Schedule Backup Network ► Move/Control Select Exit Live Mode Monitoring Event Monitoring Duration OFF OSD Date ON Time ON 1Ch DVR Support OFF Title ON State ON OK Cancel  &WFOU
.POJUPSJOH
%VSBUJPO It can be set to any of Off, 30 seconds, and CONTINUE. 0'': The event monitoring that switches to the event screen does not operate. 
4FDPOET: It sets the display duration of the current channel until the next channel is displayed. $0/5*/6&: The event monitoring screen will be maintained until it is cancelled by pressing the "-"3. button on the front panel.  04% %BUF: When it is On, the date will be displayed on the screen. When it is Off, the date will not be displayed on the screen. 5JNF: When it is On, the time will be displayed on the screen. When it is Off, the time will not be displayed on the screen. 5JUMF: When it is On, the camera name will be displayed on the screen. When it is Off, the camera name will not be displayed on the screen. 4UBUF: When it is On, the Audio/PTZ will be displayed on the screen. When it is Off, the Audio/PTZ will not be displayed on the screen. SHR-5042_Eng.indb 29 menu setup _29 2007-06-08 1:24:50