Samsung SHR-5042 User Manual - Page 37
Enter, Alarm Out, Duration, CONTINUE, ALARM, 300 Seconds, Sensitivity, Area Set, Default
View all Samsung SHR-5042 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
05 MENU SETUP Motion Detection Setup Motion Detection Setup Alarm-Out None Duration All Camera Sensitivity High Area Set Default OK Cancel Set the motion detection area, sensitivity and alarm for each camera video. Press the &OUFS( ) button after moving the cursor on the camera to be set. "MBSN0VU It sets the alarm output when a motion is detected. Currently the system supports 2 Alarm Out functions and 1 built-in speaker output. %VSBUJPO Sets the duration for Alarm Out. The alarm sound is sustained for the preset period. $0/5*/6&: The alarm output sound will be maintained until it is cancelled by pressing the "-"3. button manually on the front panel. _4FDPOET: Sets the duration for alarm output. 4FOTJUJWJUZ It relates to configuration for motion detection and sensitivity. The sensitivity can be set to Very High, High, Medium, Low or Very Low. "SFB4FU If you press the &OUFS( ) button after moving the cursor to the video display area on the right, the motion area can be set/cancelled. ( ): Sets the whole part as the motion area. ( ): Cancels the whole motion area. If you press "%FGBVMU", the motion setup is reset to the initial values. Video Loss Detection Setup Video Loss Detection Setup Alarm-Out None Duration 10 SEC None 10 SEC None None 10 SEC 10 SEC OK Cancel Move/Control Select Exit If a video loss occurs from each channel, it can be set to generate an alarm output sound. "MBSN0VU Sets an alarm-out method when an event has occurred from the Alarm In. Currently, this system supports 2 Alarm Out functions and 1 built-in speaker (beep) output. The following screen appears when you press the &OUFS( ) button after moving the cursor to the Alarm Out item. 1 Beep OK 2 All Cancel %VSBUJPO Sets the duration for Alarm Out. The alarm sound is sustained for the preset period. $0/5*/6&: The alarm output sound is maintained until it is cancelled by pressing the "-"3. button manually on the front panel. _4FDPOET: Sets the duration for alarm output. SHR-5042_Eng.indb 33 menu setup _33 2007-06-08 1:24:57