Samsung SMT-W5100E User Guide - Page 47
Mode or HEX Mode to enter the WEP Key.
View all Samsung SMT-W5100E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
5. Select the Encryption Mode. 6. In case a WEP key has been enabled, select ASCII Mode or HEX Mode to enter the WEP Key. 7. In case a WPA_PSK or WPA2_PSK key has been enabled, select AES Mode or TKIP Mode to enter the Encryption Key. 8. Enter the Encryption key and press the [OK] button. y Encryption key: Enter the Encryption key into the WLAN connection device. Refer to your system administrator to verify the Encryption key. y If no Encryption key is present, leave it blank and press [OK]. 9. The telephone has been successfully registered. 45
45
5.
Select the Encryption Mode.
6.
In case a WEP key has been enabled, select ASCII
Mode or HEX Mode to enter the WEP Key.
7.
In case a WPA_PSK or WPA2_PSK key has been
enabled, select AES Mode or TKIP Mode to enter
the Encryption Key.
8.
Enter the Encryption key and press the
[OK]
button.
Encryption key: Enter the Encryption key into the
WLAN connection device. Refer to your system
administrator to verify the Encryption key.
If no Encryption key is present, leave it blank and
press
[OK]
.
9.
The telephone has been successfully registered.