Samsung SP-A900B User Manual (user Manual) (ver.1.0) (English) - Page 37
N´T fall., aNd µUll ThE lamµ., ».s.A
View all Samsung SP-A900B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
When handling the lamp, avoid touching any part of it except for the handles. If you handle the lamp incorrectly, it may affect the screen quality and shorten its lifetime. LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL STATE OR FEDERAL LAWS. For details see lamprecycle. org, eiae.org, or call 1-800-Samsung Lamp Replacement Procedure The lamp is very hot and operates with a high voltage. Allow it to cool down for at least 1 hour after disconnecting the power cord before changing the lamp. The lamp is located at the left rear of your projector. Place your projector so that its left side is visible and then remove the screws on the lamp cover. * Be careful your projector does not fall. Open the cover by holding down (A) in the figure and pulling (B). Remove the screws (A) in the figure and then hold and open (B). Remove the screws as shown in the figure. As shown in the figure, lift up the lamp handles by holding them and pull the lamp. Assembling a new lamp is in the reverse order of the disassembly. | Care and Maintenance | Contact SAMSUNG WORLDWIDE | Other | Authority | If you have any questions or comments relating to Samsung products, please contact a SAMSUNG customer care center. U.S.A CANADA MEXICO North America 1-800-SAMSUNG(726-7864) 1-800-SAMSUNG(726-7864) 01-800-SAMSUNG(726-7864) http://www.samsung.com/us http://www.samsung.com/ca http://www.samsung.com/mx