Samsung SP-M250W User Manual (user Manual) (ver.1.0) (English) - Page 30
Connecting an AV device with component output
View all Samsung SP-M250W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
2-14 Connecting an AV device with component output Make sure that the AV device and your projector are turned off. 1. Connect the [PC IN] terminal on the back of the projector to the Component terminal on your AV device using a D-Sub to Component cable (Not supplied). This cable has a D-Sub connector on one end and three RCA jacks on the other. - For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display Modes". 2. Connect the [AUDIO IN (L-AUDIO-R)] terminal on the back of the projector and the Audio out terminal on your AV device using an audio cable (Not supplied). 2-14 Installation and Connection
2-14
Installation and Connection
2-14
Connecting an AV device with component output
Make sure that the AV device and your projector are turned off.
1.
Connect the [PC IN] terminal on the back of the projector to the Component terminal on your AV device using a D-Sub to
Component cable (Not supplied). This cable has a D-Sub connector on one end and three RCA jacks on the other.
- For supported input signal formats, resolutions, and frequencies, see AV Timing (D-Sub) in Section 2-8, "Supported Display
Modes".
2.
Connect the [
AUDIO IN (L-AUDIO-R)
] terminal on the back of the projector and the Audio out terminal on your AV device
using an audio cable (Not supplied).