Samsung TX-R2664W User Manual (user Manual) (ver.1.0) (English) - Page 15
Connecting a VCR
View all Samsung TX-R2664W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
INSTALLATION Connecting a VCR These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the instructions on pages 11-14). Skip step 1 if you have not yet connected to an antenna or a cable system. 1 Unplug the cable or antenna from the back of the TV. 2 Connect the cable or antenna to the ANTENNA IN terminal on the back of the VCR. Incoming Cable or Antenna VCR Rear Panel 3 Connect a coaxial cable VCR Rear Panel TV Rear Panel between the ANTENNA OUT terminal on the VCR and the antenna ANT IN terminal on the TV. Coaxial Cable A coaxial cable is usually included with a VCR. (If not, check your local electronics store). 4 Connect a set of audio VCR Rear Panel TV Rear Panel cables between the AUDIO OUT jacks on the AN VCR and the AUDIO jacks on the TV. Audio Cable 5 Connect a video cable VCR Rear Panel TV Rear Panel between the VIDEO OUT jack on the VCR and the Video Cable ANT IN VIDEO jack on the TV. Follow the instructions in "Viewing an External Signal Source" to view your VCR tape. 15