Samsung TX-R2678WH User Manual (user Manual) (ver.1.0) (English) - Page 16
Cable with a Cable box that Descrambles All Channels
View all Samsung TX-R2678WH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
INSTALLATION Cable with a Cable box that Descrambles All Channels 1 Find the cable that is connected to the ANTENNA OUT terminal on your cable box. This terminal might be labeled "ANT OUT", "VHF OUT", or simply, "OUT". 2 Connect the other end of this cable to the ANT 1 IN or ANT 2 IN terminal on the rear panel. Connecting to a Cable Box that Descrambles Some Channels If your cable box descrambles only some channels (such as premium channels), follow the instructions below. You will need a two-way splitter, an RF (A/B) switch, and four lengths of coaxial cable. (These items are available at most electronics stores.) 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal on your cable box. ▼ This terminal might be labeled "ANT IN," "VHF IN," or simply, "IN." 2 Connect this cable to a two-way splitter. 3 Connect a coaxial cable between an OUTPUT terminal on the splitter and the IN terminal on the cable box. English - 16