Samsung WA45K7600AW/A2 User Manual - Page 52
Make sure the drain hose is pointed downward. Natural drain - model
View all Samsung WA45K7600AW/A2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Troubleshooting Problem Action Fills with the wrong temperature water. • Fully open both water taps. • Make sure the temperature selection is correct. • Make sure the hoses are connected to the correct water taps. Flush water lines. • Disconnect the hoses and clean the screens. The hose filter screens may be clogged. • While the washing machine fills, the water temperature may change as the automatic temperature control feature checks incoming water temperature. This is normal. • While the washing machine fills, you may notice just hot and/ or just cold water going through the dispenser when cold or warm temperatures are selected. This is a normal function of the automatic temperature control feature as the washing machine determines the water temperature. Door (Lid) locked or will not open. • While the washing machine is operating, press or tap Start/ Pause to stop the washing machine. • It may take a few moments for the door lock mechanism to disengage. Does not drain and/ or spin. • Check the fuse or reset the circuit breaker. • Make sure the electrical voltage is normal. • Make sure the washing machine is plugged in. • Make sure the drain hose is pointed downward. (Natural drain models only) • Make sure the drain hose is not clogged. • Make sure the drain hose is not kinked. • Straighten the drain hose. If there is a drain restriction, call for service. • Close the door, and press or tap Start/Pause. For your safety, the washing machine will not spin unless the door is closed. • Use the High or Extra High spin speed. (Applicable model Load is wet at the end of the cycle. • • only) Use high efficiency (HE) detergent to reduce oversudsing. Load is too small. Small loads (one or two items) may become unbalanced and not spin completely. 52 English 8",@8",4@&/JOEE Troubleshooting