Samsung WF42H5200AP/A2 User Manual Ver.0 (English, French, Spanish) - Page 21

03 washing a load of laundry Select Cycle 6 Option Start/Pause 7 selection button 8 Power button Press these buttons to select different cycle options. Extra Rinse - Add an additional rinse at the end of the cycle to remove laundry additives and perfumes more thoroughly. Extra Spin - Add additional time to remove more water from loads. Spin Only - The option to start only Spin of each course. Steam - Press this button to use the Steam Wash function. Steam Wash is available with the Normal, Heavy Duty, Bedding, Sanitize and Allergen cycles. For heavily soiled, colorfast garments, Steam Wash improves stain treatment and uses less water (See page 25). (Only for WF42H5200A* models.) Sound - When you activate the Sound off function, the "Sound [ ]" lamp illuminates. My Cycle - Choose your favorite cycle including temperature, spin, soil level, options, etc. (see page 22) Delay End - Any cycle can be delayed for up to 24 hours in one-hour increments. Displayed hour indicates the time at which the wash will be started. (See page 22). Self Clean+ - Use to clean dirt and possible mold from the drum. Regular use (after every 40 washes) is recommended. No detergent or bleach is needed (see page 31). Smart Care - This function enables you to check the status of the washing machine using a smartphone. Press to pause and restart programs. Press once to turn your washer on, press again to turn your washer off. If the washer is left on for more than 10 minutes without any buttons being touched, the power automatically turns off. Child Lock Child Lock prevents children from playing with your washer. Once you have activated the Child Lock function, the control panel cannot be activated, preventing children from playing with the washer. Activating the Child Lock function Press and hold both the Soil Level and Spin buttons simultaneously for 3 seconds. • When you activate the Child Lock function, the door locks and the "Child Lock " lamp illuminates. • If you press the START/PAUSE button after you have activated the Child Lock function , none of the buttons will work except for the POWER button. • If you press a button when the buttons are locked, the "Child Lock " lamp blinks. Pausing the Child Lock function When the door is locked or the buttons are locked by the Child Lock function, you can pause the Child Lock operation for 1 minute by pressing and holding both the Soil Level and Spin buttons simultaneously for approximately 3 seconds. • If you pause the Child Lock mode temporarily, the door lock is released for 1 minute for user convenience. During this period, the "Child Lock " lamp blinks. • If you open the door after the minute is over, an alarm sounds for up to 2 minutes. • If you close the door within the 2 minutes, the door is locked and the Child Lock function is reactivated. If you close the door after the 2 minutes, the door is not locked automatically and no alarm sounds. #&55&3@8 JOEE


 English _21