Samsung WF42H5200AP/A2 User Manual Ver.0 (English, French, Spanish) - Page 22

washing a load of laundry Deactivating the Child Lock function Press and hold both the Soil Level and Spin buttons simultaneously for approximately 6 seconds. • When you deactivate the Child Lock function, the door is unlocked and the "Child Lock " is turned off. WARNING • The Child Lock function prevents children or the infirm from accidently operating the washer and injuring themselves. • If a child enters the washing machine, the child may become trapped and suffocate. • Once you have activated the Child Lock function, it continues working even if the power is turned off. • Opening the door by force can result in injury due to damage to the product. To add laundry after you have activated the Child Lock function, you must first pause or deactivate the CAUTION Child Lock function. If you want to open the door of the washing machine when the Child Lock function is activated: • Pause or deactivate the Child Lock function. • Turn the washing machine off and then on again. Garment+ You can add or take out laundry items even after the wash has started, as long as the " " light is on. Pushing the START/PAUSE button unlocks the door, unless the water is too hot or if there is too much water in your washer. If you are able to unlock the door and wish to continue the wash cycle, close the door, and then press the START/PAUSE button. Delay End You can set the washing machine to start your wash automatically at a later time, choosing a delay time. The hour displayed indicates the time at which the wash will be started. 1. Set your wash cycles. 2. Press the Delay End button repeatedly until the delay time is set. 3. Press the START/PAUSE button. The "Delay End " indicator will be lit, and the clock will begin counting down until it reaches the set time. 4. To cancel a Delay End function, press the POWER button and then turn the washing machine on again. My Cycle Lets you save a custom wash cycle (temperature, spin, soil level, etc.) and then recall and use it with one button convenience. To save a cycle and selected options as your My Cycle, follow these steps: 1. Select the cycle using the Cycle Selector dial. 2. After cycle selection, set each option. See page 39 for available option settings with each cycle. 3. You can then store the selected cycle and options by pressing and holding the My Cycle button for longer than 3 seconds. The cycle and options you select will be displayed the next time you choose the My Cycle function. 4. Press the My Cycle button to load and use the saved My Cycle options. The "My Cycle" light will indicate activation. Also, the chosen course and option lights will flicker You can change the "My Cycle" settings by repeating the process above. The washer displays the last settings used the next time you choose "My Cycle". If you press My Cycle and release it within 3 seconds, the previously saved cycles and options appear. If you press and hold My Cycle for 3 second or longer, the currently set cycles and options are saved and the LED blinks for 3 seconds. 22_English #&55&3@8 JOEE