Samsung WF42H5200AP/A2 User Manual Ver.0 (English, French, Spanish) - Page 34

Information Codes - 4e error code

Get Samsung WF42H5200AP/A2 PDF manuals and user guides View all Samsung WF42H5200AP/A2 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 34 highlights

troubleshooting Information codes The washer may display information codes to help you better understand what is occurring with your washer. ERROR CODE UE dE dE1 MEANING & SOLUTION Unbalanced load prevented your washer from spinning. Redistribute the load, press the Start/Pause button. The door is open when the washer is running. Close the door tightly and restart the cycle. If the code reappears, call customer service. Your washer failed to lock or unlock the door. HE A water temperature control problem. (Heater control problem) Call customer service. Your washer has tried to fill, but has not reached the proper water level. Call customer service. LE When washer displays "LE", washer do draining for 3 minutes,At this time, Power button is invalid. Your washer is not draining. This can also mean that the unit senses a small clog while draining. 1. Turn off the unit for 10 seconds and then turn it on again. 5E 2. Select the Spin Only cycle. 3. Press the Start/Pause to drain the water. If it still does not drain, call for service. Your washer has tried to fill but was unsuccessful. Make sure the water faucets are open all the way. Check for bent hoses. Check the inlet screens on the hoses. If you are using a Flood Safety Device, please remove the device and connect the water hoses directly to the unit. Check if the hot water supply hose is connected. 4E You must connect the hot water supply hose because hot water is supplied by the Auto Temperature Control (A.T.C.) function if the temperature of the cold water is lower than 59°F. When washer displays "4E", washer do draining for 3 minutes. At this time, Power button is invalid The hot/cold water hose connection is not correct. 4E2 Please connect the hot/cold water hose connection correctly. OE A fault is detected in the water level sensor. Call customer service. The Water Level sensor is not working properly. 1E Call customer service. When washer displays "1E", washer do draining for 3 minutes,At this time, Power button is invalid #&55&3@8 JOEE 34_English

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
34_English
INFORMATION CODES
The washer may display information codes to help you better understand what is occurring with your
washer.
ERROR CODE
MEANING & SOLUTION
UE
Unbalanced load prevented your washer from spinning.
Redistribute the load, press the Start/Pause button.
dE
The door is open when the washer is running.
Close the door tightly and restart the cycle. If the code reappears, call customer
service.
dE1
Your washer failed to lock or unlock the door.
HE
A water temperature control problem. (Heater control problem)
Call customer service.
LE
Your washer has tried to fill, but has not reached the proper water level.
Call customer service.
When washer displays “LE”, washer do draining for 3 minutes,At this time,
Power button is invalid.
5E
Your washer is not draining. This can also mean that the unit senses a small clog
while draining.
1.
Turn off the unit for 10 seconds and then turn it on again.
2.
Select the Spin Only cycle.
3.
Press the Start/Pause to drain the water.
If it still does not drain, call for service.
4E
Your washer has tried to fill but was unsuccessful.
Make sure the water faucets are open all the way. Check for bent hoses. Check the
inlet screens on the hoses. If you are using a Flood Safety Device, please remove
the device and connect the water hoses directly to the unit.
Check if the hot water supply hose is connected.
You must connect the hot water supply hose because hot water is supplied by the
Auto Temperature Control (A.T.C.) function if the temperature of the cold water is
lower than 59°F.
When washer displays “4E”, washer do draining for 3 minutes. At this time,
Power
button is invalid
4E2
The hot/cold water hose connection is not correct.
Please connect the hot/cold water hose connection correctly.
OE
A fault is detected in the water level sensor.
Call customer service.
1E
The Water Level sensor is not working properly.
Call customer service.
When washer displays “1E”, washer do draining for 3 minutes,At this time,
Power button is invalid
troubleshooting
BETTER_WF42H5200-03397A_EN.indd
34
2014-1-24
11:23:10