Samsung WF448AAW User Manual (ENGLISH) - Page 25

05 Troubleshooting INFORMATION CODES Information codes may be displayed to help you better understand what is occurring with your Washer. ERROR IMAGE Error! Unbalanced Load MEANING Unbalanced load prevented your Washer from spinning. SOLUTION Redistribute the load, press the Start/ Pause Button. Error! The door was unlocked while the washer was running. Error! Door is open. Door is unlocked when Washer is running. Press the Power button to turn off your Washer, then restart the cycle. If the code reappears, call for service. Door is open when Washer is running. Close the door tightly and restart the cycle. If the code reappears, call for service. Error! The washer door would not lock. Your Washer failed to lock the door. Close the door tightly and restart the cycle. If the code reappears, call for service. Error! Water Temperature control problem. Water temperature control problem. (Heater Control problem) Call for service. Error! Water Leakage Problem Your Washer has tried to fill but has not Call for service. reached the proper water level. Error! Water Level Sensor Problem. Water level sensor problem Call for service. Error! The door will not unlock. Error! No Draining Error! Low Water Pressure The door will not unlock. Your washer is not draining. It can also mean that the unit senses a small clog while draining. Your Washer has tried to fill but was unsuccessful. Make sure the door is firmly closed. Push the Power button to turn off your Washer, then turn it on again. If the code reappears, call for service. Before calling for service, check the following. 1) Turn off the unit and turn it on again. 2) Select only the Spin Cycle. 3) Press the Start/Pause to drain the water. If it still does not drain, call for service. Make sure the water faucets are open all the way. Check for kinked hoses. Check the inlet screens on the fill hoses. Troubleshooting _25 WF448AAW-02535A-02_EN.indd 25 2008-05-06 ¿ÀÈÄ 2:23:34