SanDisk C250 User Manual - Page 10
Playback Screen, Li-Polymer Battery
UPC - 619659034351
View all SanDisk C250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Playback Screen 1 - Submenu Indicates that there is a Submenu available 2 - Shuffle Indicates when the Shuffle function is enabled 3 - Repeat Indicates when the Repeat function is enabled 4 - Track Number Displays the current track number and the total number of tracks 5 - Battery Indicates the battery status 6 - Track Length Displays the elapsed time of currently playing track 7 - Progress Meter Displays status of the currently playing track 8 - Play/Pause To play, resume, or pause currently playing track 9 - Track Name Displays name of currently playing track 10 - Album Name Displays album name of the currently playing track 11 - Artist Name Displays artist name of the currently playing track Li-Polymer Battery The Sansa c200 player comes with a replaceable and rechargeable lithium polymer battery. Remember to fully charge the battery before using the device for the very first time. It takes approximately 3.5 hours to fully charge the battery. The battery can be charged through the USB port of the computer, the car adapter (not included) USB port, or the USB-AC adapter (not included) port. Note: • Some low-power USB ports may not be able to provide enough charge power. • The Li-polymer rechargeable battery may eventually need to be replaced as they have limited charge cycles. • To purchase a replacement battery, visit your local retailer or www.sandisk.com Charging battery over USB 1) Connect the larger end of the USB cable into the dock connector of the Sansa player. 2) Connect the smaller end of the USB cable to an available USB port on the computer. 3) The Sansa c200 display screen will say Connected. 4) To stop recharging, disconnect the cables. Note: The computer must be on for most USB ports to charge your battery. Getting Started 7