Sanyo AWM-660 Instruction Manual - Page 12
Listening To The Tapes
View all Sanyo AWM-660 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
LISTENING TO PRESET STATIONS Program stations as described in "TO PRESET STATIONS". Preset tuning (Remote control only) 1. Press [TUNER/BAND] to select AM or FM. TUNER /BAND 2. Press [TU PRESET] to select the desired program number. The selected channel number appears. • The number buttons on the remote control can also be used. Press two buttons within 2 seconds. Preset scan tuning (Remote control only) 1. Press [TUNER/BAND] to select AM or FM. 2. Press and hold down [TU PRESET] for at least 1 second. • The preset stations are selected in sequence for approximately five seconds each. 3. Press [TU PRESET] when the desired station has been selected. Preset scanning will stop. v v v v NOTES: • To receive an FM stereo broadcast, make sure that "MONO" is not displayed. If "MONO" appears, press [FM MODE/REPEAT] on the remote control to turn the "MONO" indication off. " ST " appears when an FM stereo broadcast is received. • If the signal from an FM stereo stations is weak and reception is poor, press [FM MODE/REPEAT] on the remote control to change to monaural reception. (" ST " is replaced by "MONO" in the display.) Changing the reception frequencies It is not necessary to perform this procedure in the U.S. and Canada. 1. Select the band to be changed. 2. While pressing [ N ] on the front panel, press [TUNING -] on the front panel for at least 1 second. AM: 520 ~ 1710 kHz (10 kHz steps) 522 ~ 1710 kHz (9 kHz steps) FM: 87.9 ~ 107.9 kHz (200 kHz steps) 87.5 ~ 108.0 MHz (50 kHz steps) LISTENING TO THE TAPES 5 3,6 M AD C K 3. Press [STOP/EJECT] to open the cassette holder. STOP/EJECT 2 4. Load the cassette. After loading the cassette, press the cassette holder back into position. • Don't push the cassette door forward before pressing the cassette holder down. 1 1. Press [FUNCTION] to select "TAPE". 2. Slide the cassette door backward to operate the cassette buttons. 5. Press [PLAY] to begin playback. PLAY A 6. Press [STOP/EJECT] to stop playback at any time. When the end of the tape has been reached, automatic stop will be activated. AWM-660/US Eng page 12 -E11- 4/16/04, 5:40 PM