Sanyo AWM-660 Instruction Manual - Page 14

Timer Operation

Get Sanyo AWM-660 PDF manuals and user guides View all Sanyo AWM-660 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 14 highlights

TIMER OPERATION Before setting the timer, make sure that the clock is set to the present time. See "ADJUSTING THE CLOCK". Use the main unit for timer operation. USING THE WAKE UP TIMER Set the wake-up time, source to be heard and volume level. At the set time, the selected source will be heard. The sound will be gradually increased from minimum to the selected volume setting (fadein). The wake up timer will function every day unless it is released. Example: Waking up 7:30 AM every day and listening to music until 8:15 AM 7. Press [MEMORY]. AM OFF This completes the setting of the ON time. "0 OFF" and "hour" display blink. 8. Set the OFF time by following steps 4 to 6 above. AM OFF 2 4,6 10 3,5,7,9 1. Load a compact disc or select "TUNER". • If "TUNER" is selected, select the desired station first. • Adjust the volume level as desired. 2. Press [CLOCK/TIMER] for at least 2 seconds. The previous wake-up time setting appears. AM ON 3. Press [MEMORY] within 10 seconds. "0 ON" and "hour" display blink. AM ON 4. Turn [VOLUME] to set the "hour" display. AM ON 9. Press [MEMORY]. 10. Press [z/ON] to turn the power off. The present time display remains. "0" remains lit. When the timer ON time arrives, the power is turned on automatically and the unit starts playing with the preset function selected. The volume fades in from minimum to the preset volume level. • "0" blinks while timer operation is engaged. • When the timer OFF time arrives, the power furns off and the timer is set to the standby mode. Timer operation repeats this cycle every day. • If [z/ON] is pressed during timer operation, the power is turned off and the timer is set to the standby mode. To release the timer After turning the power on, press [CLOCK/TIMER] twice, "0" disappears. To set the timer again with the same setting 1. Press [CLOCK/TIMER] repeatedly to display "0". 2. Press [z/ON] to turn the power off. NOTE: The timer operation is released if a power failure occurs. 5. Press [MEMORY]. "0 ON" and "minute" display blink. AM ON 6. Turn [VOLUME] to set the "minute" display. Need help? Call 1-800-813-3435 AM ON AWM-660/US Eng page 14 -E13- 4/16/04, 5:41 PM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
4,6
3,5,7,9
2
10
7.
Press [MEMORY].
This completes the setting of the ON time.
“
0
OFF” and “hour” display blink.
8.
Set the OFF time by following steps 4 to 6 above.
9.
Press [MEMORY].
10. Press [
z
/ON] to turn the power off.
The present time display remains.
“
0
” remains lit.
When the timer ON time arrives, the power is turned on automati-
cally and the unit starts playing with the preset function selected.
The volume fades in from minimum to the preset volume level.
•
“
0
” blinks while timer operation is engaged.
•
When the timer OFF time arrives, the power furns off and the
timer is set to the standby mode. Timer operation repeats this
cycle every day.
•
If [
z
/ON] is pressed during timer operation, the power is turned
off and the timer is set to the standby mode.
To release the timer
After turning the power on, press [CLOCK/TIMER] twice, “
0
”
disappears.
To set the timer again with the same setting
1.
Press [CLOCK/TIMER] repeatedly to display “
0
”.
2.
Press [
z
/ON] to turn the power off.
NOTE:
The timer operation is released if a power failure occurs.
-E13-
Before setting the timer, make sure that the clock is set to the
present time.
See “ADJUSTING THE CLOCK”.
Use the main unit for timer operation.
USING THE WAKE UP TIMER
Set the wake-up time, source to be heard and volume level.
At the
set time, the selected source will be heard. The sound will be gradu-
ally increased from minimum to the selected volume setting (fade-
in). The wake up timer will function every day unless it is released.
Example:
Waking up 7:30 AM every day and listening to music until
8:15 AM
1.
Load a compact disc or select “TUNER”.
•
If “TUNER” is selected, select the desired station first.
•
Adjust the volume level as desired.
2.
Press [CLOCK/TIMER] for at least 2 seconds.
The previous wake-up time setting appears.
3.
Press [MEMORY] within 10 seconds.
“
0
ON” and “hour” display blink.
4.
Turn [VOLUME] to set the “hour” display.
5.
Press [MEMORY].
“
0
ON” and “minute” display blink.
6.
Turn [VOLUME] to set the “minute” display.
TIMER OPERATION
AM
ON
AM
ON
AM
ON
AM
ON
AM
ON
AM
OFF
AM
OFF
Need help? Call
1-800-813-3435
AWM-660/US Eng page
4/16/04, 5:41 PM
14