Sanyo CE42LM4N-NA Owner's Manual - Page 10

Specifica, Tions / Helpful, Hints / Hotel - 42 in lcd monitor

Page 10 highlights

SPECIFICATIONS / HELPFUL HINTS / HOTEL MODE Specification Common specification Power source 100~240V 60Hz AV terminal AV1: CENELEC Standard (Peritel) Input: Composite video, RGB and audio-L/R Output: TV-output with composite video and audio-L/R AV2: BNC Input: RGB, H and V / Y, Pb, Pr and audio L/R Output: RGB, H and V / Y, Pb, Pr AV3: BNC Input: Composite video Output : Composite video Audio M.Out: CINCH L/R HDMI Input : HDMI GROUP Standard PC Input Serial port: RS232C: INput/Output Net Organiser: POA-LN01 (optional) When ordering these products, give the Name and Type No. to the sales dealer CE42LM4N-NA Contrast Ratio Screen(inches/ cm) (viewing measured diagonally) Display Resolution 800:1 42" / 107 cm 1366 X 768 (WXGA) Viewing angles H:178°, V:178° Dimensions (WxHxD inch) 41.34" x 25.74" x 5.97" (WxHxDmm) 1050mm x 654mm x 150mm Weight 79.4lbs/36Kg Helpful hints ■ NO PICTURE ● Check if the monitor is plugged in. ● Try a different channel, if OK, probably station trouble. ■ POOR PICTURE ● Adjust BRIGHTNESS control. ■ NO COLOR, PICTURE OK ● Adjust COLOR control. ● Is the programme in color? The following faults are not caused by the receiver: "INTERFERENCE" Interference may be caused by electrical appliances, car ignition systems, etc. This should normally be a temporary condition, but should this interference persist, contact your dealer. Specification This LCD monitor set allows you to set up the following: ■ Prohibition of presetting. This prohibits the use of tuning. ■ Programme position at Start up SETTING PROCEDURE: 1 . Press and hold the green button on the Remote control handset for 5 secongs. 2. Use the 5 or 6 button to highlight Hotel Mode, use the 1 to switch ON or OFF. Hotel Hotel mode On program Preset Address Baud Rate : Select ON / OFF AV1-AV3 /RGB/ HDMI/ PC ON / OFF 007 19200 : Adjust MENU : Exit 3. Select ON program using the 6 button, select the start up position using the 1 or 2 buttons. (Off / 1-99/ AV1 / RGB/ AV2/ AV3/ HDMI/ PC) 4. Press the MENU button to exit from the menu. This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

10
Common specification
Power source
100~240V 60Hz
AV terminal
AV1: CENELEC Standard (Peritel)
Input: Composite video, RGB and audio-L/R
Output: TV-output with composite video and audio-L/R
AV2: BNC
Input: RGB, H and V / Y, Pb, Pr and audio L/R
Output: RGB, H and V / Y, Pb, Pr
AV3: BNC
Input: Composite video
Output : Composite video
Audio M.Out: CINCH
L/R
HDMI
Input :
HDMI GROUP
Standard
PC
Input
Serial port: RS232C: INput/Output
Net Organiser: POA-LN01
(optional)
When ordering these products, give the Name and Type No. to the
sales dealer
CE42LM4N-NA
Contrast Ratio
800:1
Screen(inches/ cm)
42” / 107 cm
(viewing measured
diagonally)
Display Resolution
1366 X 768 (WXGA)
Viewing angles
H:178°, V:178°
Dimensions (WxHxD inch)
41.34” x 25.74” x 5.97”
(WxHxDmm)
1050mm x 654mm x 150mm
Weight
79.4lbs/36Kg
NO PICTURE
Check if the monitor is plugged in.
Try a different channel, if OK, probably station trouble.
POOR PICTURE
Adjust BRIGHTNESS control.
NO COLOR, PICTURE OK
Adjust COLOR control.
Is the programme in color?
The following faults are not caused by the receiver:
"INTERFERENCE"
Interference may be caused by electrical appliances, car ignition
systems, etc. This should normally be a temporary condition, but
should this interference persist, contact your dealer.
This LCD monitor set allows you to set up the following:
Prohibition of presetting.
This prohibits the use of tuning.
Programme position at Start up
SETTING
PROCEDURE:
1 .
Press and hold the
green button
on the Remote control
handset for 5 secongs.
2.
Use the
5
or
6
button
to highlight
Hotel Mode
, use the
1
to switch ON or OFF.
3.
Select ON program using the
6
button, select the start up posi-
tion using the
1
or
2
buttons.
(Off / 1-99/ AV1 / RGB/ AV2/ AV3/ HDMI/ PC)
4.
Press the
MENU button
to exit from the menu.
SPECIFICA
SPECIFICA
TIONS / HELPFUL
TIONS / HELPFUL
HINTS / HOTEL
HINTS / HOTEL
MODE
MODE
Specification
Helpful hints
MENU
Hotel mode
ON / OFF
On program
Preset
ON / OFF
Address
007
Baud Rate
1
9
200
AV1-AV3 /RGB/ HDMI/ PC
Hotel
: Select
: Adjust
: Exit
Specification
This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc.
It is designed and manufactured to meet rigid U.L. safety standards against risk of fire,
casualty and electrical hazards.