Sanyo DP19241 Owners Manual - Page 15
Using an AV Amplifier with built-in digital surround, To connect a HDMI or a DVI device to the unit - 19
View all Sanyo DP19241 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH Connections to other equipment Using an AV Amplifier with built-in digital surround If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including Dolby Digital Surround audio that sounds just like the movie. Connect an AV amplifier with built-in Dolby Digital decoder, etc. as shown below. Rear of the unit To DIGITAL AUDIO COAXIAL OUT Front Speaker (Left) Subwoofer TV Front Speaker (Right) Coaxial digital cable (not supplied) To Coaxial Digital Audio IN Center Speaker AV Amplifier with built-in digital surround decoder as listed above Surround Speaker (Left) Surround Speaker (Right) NOTE: • When you are viewing digital broadcast, this unit will not work in conjunction with DTS audio or MPEG audio. There will be no sound output if connected to an AV amplifier with a built-in DTS decoder or MPEG decoder. • Digital Audio Output terminal does not output the sounds from devices connected by HDMI. To connect a HDMI or a DVI device to the unit The HDMI input receives digital audio and uncompressed video from a HDMI device or uncompressed digital video from a DVI device. When you connect to a DVI device with a HDMI-to-DVI adapter cable, it transfers only video signal. Separate analog audio cords required. Left of the unit To HDMI out or HDMI device To PC/DVI AUDIO IN To HDMI/DVI IN HDMI cable (type A connector) (not supplied) HDMI - to - DVI adapter cable (HDMI type A connector) (not supplied) Audio cord (not supplied) DVI device To DVI output NOTE: • When using HDMI/DVI to connect your HDMI or DVI devices, you must select the corresponding audio input source (HDMI or DVI) on the menu screen (see page 19). Otherwise you will only see the image with no sound. • If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using an HDMI cable or a DVI to HDMI cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture you must change the output resolution on the external component. Should you require further instruction, please contact the manufacturer of the external component. 15 3FR0321A_En.indd 15 1/7/11 4:32:11 PM