Sanyo DP52449 Owners Manual - Page 22
Rogramming, Acros - won t turn on
View all Sanyo DP52449 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
UNIVERSAL REMOTE CONTROL, ADVANCED OPERATION PROGRAMMING MACROS Your GXDB universal remote control includes the ability to program any key (other than the SET key) with a Macro function. Each one can be set up to perform a pre-programmed set of sequential key presses with the press of one single key. A macro can be used to control a home theater operation, to set a favorite channel, or for other multiple functions you would like to control with one key press. Moreover, each Macro Key can hold up to 15 key presses total. NOTE: Programming a new macro over an existing one erases the original macro. PROGRAMMING A MODE INDEPENDENT MACRO 1. Press and hold SET until the red LED blinks twice, then release. 2. Press 9 9 5. The LED blinks twice. 3. Press the key you wish to assign a macro on. 4. Enter the series of commands you want the macro to execute (up to 15 commands). 5. Press and hold SET until the red LED blinks twice, then release. Now, when you press the macro key , the remote sends the series of commands you have entered, but only if you are in the mode you selected in step 1. For example, you could program the macro key to turn on both your TV and cable box and select a particular channel, but only if you are in TV mode. If you are in DVD mode, this key does not execute the macro you set up in TV mode. To clear the macro, repeat steps 1-6 above, but do not enter a series of commands at step 5. IMPOTANT FACT: "TV" mode is dedicated only to a Sanyo TV. By pressing the TV key on your remote control the Sanyo TV control code is reactivated. Now, when you press the preset macro key , the remote sends the series of commands you have entered, regardless of what mode you are in. For example, you could program a macro key to turn on both your TV and cable box and select a particular channel. To clear the macro, repeat steps 1-5 above, but do not enter a series of commands at step 4. PROGRAMMING A MODE-DEPENDENT MACRO 1. Press the device mode key (DVD, STB, or AUX). 2. Press and hold SET until the LED blinks twice, then release. 3. Press 9 7 8. The LED blinks twice. 4. Press the key you wish to assign a macro on. 5. Enter the series of commands you want the macro to execute (up to 15 commands). 6. Press and hold SET until the red LED blinks twice, then release. 22 Need help? www.sanyoctv.com 1-800-877-5032