Sanyo ECD-T1580DV Owners Manual - Page 19

Operation - manual

Page 19 highlights

OPERATION BASIC OPERATION Turning the player on/off Press the POWER button on the front panel or (POWER) button on the remote control to turn the player on or off. Open/Close the Monitor and Angle Adjustment Press OPEN/CLOSE button on the front panel or point the remote control to the remote sensor on the front panel and press OPEN/CLOSE button on the remote control, the monitor will draw out automatically. OPEN/CLOSE button Fig.1 When the monitor draws out to a certain location, it will turn upward automatically and stop at vertical position. Do not rotate the monitor forcibly to avoid mechanical damage. Fig.3 Return the monitor to the central viewing position, then press OPEN/CLOSE button on the front panel or press OPEN/CLOSE button on the remote control, the monitor will turn downward automatically . Fig.4 When the monitor turns downward to a certain angle, it will draw in. Fig.2 Adjusting the viewing angle. When the monitor stops moving, you can press PANEL+ or PANEL- button on the remote control to turn the monitor upward or downward at fine steps to get a desired viewing angle. And you can rotate the monitor left and right from the central viewing position at a certain angle range manually. 19 Fig.5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

19
OPERATION
BASIC OPERATION
Turning the player on/of
f
Press the
POWER
button on the front
panel or
(POWER)
button on the
remote control to turn the player on or
off.
Open/Close the Monitor and Angle
Adjustment
Press
OPEN/CLOSE
button on the
front panel or point the remote control
to the remote sensor on the front panel
and press
OPEN/CLOSE
button on the
remote control, the monitor will draw out
automatically.
Fig.1
When the monitor draws out to a
certain location, it will turn upward
automatically and stop at vertical
position.
Fig.2
Adjusting the viewing angle.
When the monitor stops moving, you
can press
PANEL+
or
PANEL-
button
on the remote control to turn the
monitor upward or downward at fine
steps to get a desired viewing angle.
And you can rotate the monitor left and
right from the central viewing position
at a certain angle range manually
.
Do not rotate the monitor forcibly to
avoid mechanical damage.
Fig.3
Return the monitor to the central
viewing position, then press
OPEN/CLOSE
button on the front
panel or press
OPEN/CLOSE
button
on the remote control, the monitor will
turn downward automatically.
Fig.4
When the monitor turns downward to
a certain angle, it will draw in.
Fig.5
OPEN/CLOSE button