Sanyo ET30L Instruction Manual, PLC-ET30L - Page 19
Lens Installation, Attaching the lens to the projector, Removing the lens
UPC - 086483069925
View all Sanyo ET30L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Installation Lens Installation When replacing the lens or using an optional lens, install the lens by following the instructions below. Ask the sales dealer for detailed information of the optional lens specifications. Removing the lens 1 Shift the lens to the center position by using the Lens shift function (see page 28). 2 While pressing the Lens release button on the top of the cabinet, turn the lens counterclockwise until it stops and pull it out slowly from the projector. CAUTION Be careful when handling the lens. Do not drop. Lens Release button Attaching the lens to the projector 1 Remove the lens mount cover. 2 Fit the lens to the projector by aligning the red dot on the lens with the red dot of the projector. 3 Slowly turn the lens clockwise until it clicks. Make sure that the lens is fully inserted to the projector. CAUTION Do not press the lens release button when attaching the lens. Red dots 19