Sanyo ET30L Instruction Manual, PLC-ET30L - Page 58
Maintenance and Filter Cleaning, Cleaning the Filter, Resetting the Filter Counter
UPC - 086483069925
View all Sanyo ET30L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Maintenance and Filter Cleaning Cleaning the Filter Filter prevents dust from accumulating on the optical elements inside the projector. Should the filter becomes clogged with dust particles, it will reduce cooling fans' effectiveness and may result in internal heat buildup and adversely affect the life of the projector. If a "Filter warning" icon (yellow or red) appears on the screen and the WARNING FILTER indicator lights or blinks, clean the filter immediately. Clean the filter by following the steps below. 1 Turn off the projector, and unplug the AC power cord from the AC outlet. 2 First, clean up the dust on the projector and around the air vents. 3 Pull out the filter cover from the projector and then remove the filter. 4 Gently clean the filter by using a brush or blower. WARNING: Do not wash the filter with water and any other liquid matter. Otherwise the filter may be damaged. 5 Reinstall the filter into the projector properly. Filter cover Filter Filter Filter cover 6 Reset the filter counter in the Setting Menu. See "Resetting the Filter Counter" below. CAUTION Do not operate the projector with the filter removed. Dust may accumulate on the optical elements degrading picture quality. Do not put anything into the air vents. Doing so may result in malfunction of the projector. Press and hold the filter cover and pull out the filter. NOTE: If the filter is heavily clogged and unable to clean, replace it with a new one. Consult your dealer for details. Replacement Filter Part No.: 910-330-7184 Resetting the Filter Counter Be sure to reset the Filter counter after cleaning or replacing the filter. 1 Press the MENU button to display the On-Screen Menu. Use the Point 7 8 buttons to move the red frame pointer to the Setting Menu icon. 2 Use the Point ed buttons to move the red frame pointer to Filter counter and then press the SELECT button. A dialog box appears showing the total accumulated time of the filter use, a timer setting option, and the reset option. Select Reset and the "Filter counter Reset?" appears. Select [Yes] to continue. 3 Another confirmation dialog box appears, select [Yes] to reset the Filter counter. Filter counter Select Reset and the "Filter counter Reset?" appears. Select [Yes], then another confirmation box appears. Select [Yes] again to reset the Filter counter. 58