Sanyo FW40D48F Owners Manual - Page 33

5 Upgrade your TV software SANYO continuously tries to improve its products and we strongly recommend that you upgrade the TV software when upgrades are available. New software can be downloaded from our website at www.sanyo-av.com/support/download using the model number of your TV to find information. Checking your current software version 1 Press MENU and use H I to select Features, then press OK. 2 Use H I to select Software upgrade, then press OK. Picture Sound Setup Features Language USB Current software info Upgrade 33 .English Downloading the software Find information and software related to your TV and download the latest software upgrade file to your PC. 1 On your PC, open a web browser and go to www.sanyo-av.com/support/download 2 Enter the model number in the "Type the Model Number..." field. 3 Click the desired software to be downloaded. ● Decompress the ZIP-file. 4 Copy the upgrade file to the empty root directory on the clean formatted USB memory stick. Starting the software upgrade Warning ● When the software upgrade is running, don't press any keys. ● Do not remove the USB memory stick during the software upgrade. ● If an error occurs during the upgrade, retry the procedure or for further assistance, please contact the call center. 1 Connect your USB memory stick with the upgrade file to the USB service port on the back of your TV. Use only the unit's side panel keys to enter the following instruction Steps 2 to 6. 3 Use H I to select Current software info, then press OK. ● The version and a description of the current software is displayed. Picture Sound Setup Features Language USB Back Release Version: XXXXXXXX_XX_XX_XXXX_XXXX Upgrading the software You can upgrade the software by using a USB memory stick. Preparing for the software upgrade You require the following equipment : ● A PC with web browsing capability. ● An archive utility that supports the ZIP-format (e.g. WinZip for Windows or Stuffit for Mac OS). ● A blank empty clean formatted USB memory stick. Note(s) ● Only FAT / DOS-formatted portable memory is supported. ● Use only software upgrades that can be found on the SANYO website. 2 Press MENU and use H I to select Features, then press OK. 3 Use H I to select Software upgrade, then press OK. 4 Use H I to select Upgrade, then press OK. 5 Read the on-screen instructions and confirm that you want to continue with the installation. Picture Sound Setup Features Language USB Would you like to upgrade the software? Start now 6 When the software upgrade is completed, press B to set the unit into standby mode, then remove the USB memory stick and then press B again to turn the unit back on. ● The TV starts up with the new software. For further assistance, please contact the call center.