Sanyo FWBP706F Owners Manual - Page 12
CONNECTIONS, Connection to a TV
View all Sanyo FWBP706F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4. CONNECTIONS 4.1. Connection to a TV CC HDMI connection (Supports up to 1080i(*1), 1080p(*2), 1080p/24(*3) resolution.) Your TV HDMI OUT HDMI cable (not included) HDMI IN (*1) 1080i: Outputs video data with a frame rate of 30 frames per second. (*2) 1080p: Outputs video data with a frame rate of 60 frames per second. (*3) 1080p/24: Outputs video data with a frame rate of 24 frames per second. To enable 1080p/24 output, set "Resolution" to "Auto" or "1080p", and set "HDMI1080p 24Hz" to "On". • Do not tilt the connector when inserting it into the HDMI jack, and make sure the shapes of the jack and the connector are matched. • When connected to an HDCP incompatible display device, the picture will not be displayed properly. • Use an HDMI cable with the HDMI logo (a certified HDMI cable) for this connection. High Speed HDMI cable (also known as HDMI category 2 cable) is recommended for better compatibility. DD Not • If the TV receives no audio / video signal after properly connecting the unit and the TV with an HDMI cable, it may be the TV. Please refer to the TV's user's manual. • If the TV receives no audio signal after properly connecting the unit and the TV with an HDMI cable, make sure the TV input is not an HDMI-DVI input terminal. EN 12