Sanyo FWBP706F Owners Manual - Page 14
HDMI audio output, Audio Output > HDMI setting, Bitstream, Re-encode, Source
View all Sanyo FWBP706F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
4.3. HDMI audio output Media BD DVD Audio CD DTS-CD AVCHD Audio File Netflix VUDU YouTube™ "Audio Output" > "HDMI" setting A Source Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD High Resolution DTS-HD Master Audio LPCM Dolby Digital DTS MPEG PCM LPCM DTS Dolby Digital LPCM MP3/FLAC/WAV AAC Dolby Digital Plus HE-AAC Dolby Digital Dolby Digital Plus HE-AAC MP3 HE-AAC Bitstream Dolby Digital Dolby Digital Plus Dolby TrueHD DTS DTS-HD High Resolution DTS-HD Master Audio Multi LPCM Dolby Digital DTS Multi LPCM Multi LPCM 2ch PCM DTS Dolby Digital Multi PCM 2ch PCM AAC(*4) Dolby Digital Plus AAC Dolby Digital Dolby Digital Plus AAC 2ch PCM AAC PCM Re-encode 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM(*2) 2ch PCM(*2) Multi LPCM 2ch PCM 2ch PCM Multi LPCM Multi LPCM 2ch PCM 2ch PCM 2ch PCM Multi PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM 2ch PCM Dolby Digital Dolby Digital Plus(*1) Dolby TrueHD(*1) DTS DTS-HD High Resolution(*3) DTS-HD Master Audio(*3) Multi LPCM(*1) Dolby Digital DTS Multi LPCM Multi LPCM 2ch PCM DTS Dolby Digital Multi PCM 2ch PCM AAC(*4) Dolby Digital Plus AAC Dolby Digital Dolby Digital Plus AAC 2ch PCM AAC *1) If there is secondary audio or interactive audio, it will be output in Dolby Digital. *2) Only the core substream is decoded. *3) If there is secondary audio or interactive audio, it will be output in DTS. *4) AAC Raw only supports the source with sample rate between 32kHz and 48kHz. DD Not • If the connected device is not compatible with HDMI BITSTREAM, audio will be output as multi LPCM or 2-channel down-mixed LPCM depending on the capability of the connected device even if you select "Bitstream" in "HDMI" setting. • If "HDMI" is set to "Bitstream" and this unit is connected to a bitstream compatible device, only primary audio of the BD-Video will be output. (Secondary audio and button sounds will not be output.) • In order to configure "HDMI" settings, the following conditions must be met: --"Voice Guide" is set to "Off". --This unit is not in resume-on-stop mode. If this unit is in resume-on-stop mode, remove the disc to enable configuration. EN 14