Sanyo FWDP175F Owners Manual - Page 19

C Audio Setting Choose the appropriate Audio Settings for your device. It only affects the Sound during DVD Playback. Follow steps 1 and 2 on page 16. 3 Select the desired item. 4 Audio Out: (Default: PCM) Set to "Bitstream" when the unit is connected to a Dolby Digital decoder. --Bitstream: outputs a Dolby Digital signals. --PCM: convert the Dolby Digital into PCM (2 channel). 5 To Exit the Menu SYSTEM LANGUAGE AUDIO VIDEO OTHER Audio Out Dynamic Range Bitstream PCM ENTER Audio Out Dynamic Range Bitstream PCM Select the Desired Setting. Dynamic Range (Default: 0) Adjusts for Clarity even when the Volume is Low, by Compressing the Range of the lowest sound level and the highest sound level. Audio Out ∙8 Dynamic Range ∙6 ∙4 ∙2 ∙0 Note(s): Audio Out: --Bitstream: Connecting to a Dolby Digital decoder for Dolby Digital Audio output. The multi-channel audio signals are output from HDMI OUT jack with Bitstream or LPCM. --PCM: Connecting to another device (an MD deck or DAT deck etc.) without a Dolby Digital Decoder. Convert the Dolby Digital into LPCM (2 channel). • This unit does not support DTS audio. This is not a malfunction. You need to set this unit to "Bitstream" in the "Audio Out" Menu and also need to Connect to a TV or Amplifier that supports DTS, then the audio will be output as DTS. It is only available when connected via an HDMI cable. • "Audio Out" cannot be configured when Voice Guide is set to On, as it is fixed to PCM. In order to configure the setting, set Voice Guide to Off. EN - 19 -