Sanyo FWSB405F-A Owners Manual - Page 14

The following chart describes behavior of the PAIR indicator and to-do's for playback, according to each behavior sequence of the PAIR indicator. PAIR indicator behavior (The arrow indicates the passage of time.) The current status of Bluetooth and the procedures to complete Bluetooth connection for Bluetooth playback. 1 Blinks twice g light off g repeats Waiting for a new Bluetooth compatible device to connect (status: pairing). On the Bluetooth compatible device to connect, select the soundbar's name (*1), then connect. A Bluetooth compatible device is connected. 2 Remains lit Music can be played from the connected Bluetooth compatible device (*2). No Bluetooth compatible device is connected. To reconnect with 3 Blinks slowly the last connected Bluetooth compatible device, press BLUETOOTH (*2). Trying to connect with the last connected Bluetooth compatible 4 Blinks rapidly device. Enable Bluetooth on the last connected Bluetooth compatible device and wait a moment (*2). Either another audio input is selected or the soundbar is in standby. If all indicators are off, press to turn on the soundbar. When all 5 Remains unlit indicators except the blue LED are lighting up or blinking, press BLUETOOTH. The (Bluetooth) indicator will start blinking or light up. Follow 1-4 in this chart. *1 This soundbar's name is "SANYO_FWSB405F" or "2.0ch Soundbar". If this soundbar has already been registered to a Bluetooth compatible device and the connection fails, delete it (or deactivate it), then press PAIR and select this soundbar's name to connect. *2 To play music from a different Bluetooth compatible device, press Bluetooth compatible device to connect . (*1) PAIR, then select this soundbar's name on the NOTE(S) • If reconnecting the Bluetooth compatible device to the soundbar fails, delete the registered profile of this soundbar from the Bluetooth compatible device, then perform pairing again. This unit can store up to 4 device profiles. • The music streaming may be interrupted by obstacles between the device and soundbar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. • If you want to connect your soundbar with another Bluetooth compatible device, press current connection. PAIR to disconnect the • Depending on your Bluetooth compatible device, different behaviors may appear. See your Bluetooth compatible device's user manual for details. • The operational range between the soundbar and a Bluetooth compatible device is approximately 30 feet (10 m), if there is no interference or obstacles. EN - 14 -