Sanyo FWSB415E Owners Manual - Page 13

2 On the Bluetooth device, switch on Bluetooth, search for and select SANYO FWSB415E (see the user manual of the Bluetooth device on how to enable Bluetooth). 3 When the Bluetooth connection succeeds, the Bluetooth indicator lights up. • If no any bluetooth device is connected in two minutes, press PAIR on remote control to activate the paring mode again. 4 Select and play audio files or music on your bluetooth device. • During play, if a call is coming, music play is paused. Play resumes when the call ends. 5 To exit Bluetooth, select other source. • When your switch back to Bluetooth mode, Bluetooth connection remains active. Note •• The music streaming may be interrupted by obstacles between the device and SoundBar, such as wall, metallic casing that covers the device, or other devices nearby that operate in the same frequency. •• If you want to connect your SoundBar with another Bluetooth device, press PAIR button to disconnect the currently connection. 5.4 Night Mode Night Mode is a digital Audio feature equipped with Dolby digital decoder. When you watch movie late at night, lowering volume level during loud sound scenes, dynamic range will be pressed down and you miss some dialogue and narration. With this "Night Mode" you can control volume level down but still can enjoy fair level of audio tone and voice. 1 In any mode, Long press CLASSIC on remote control for 3 seconds to switch night mode on or off. »» The OPTICAL INPUT indicator on the front panel of main unit blinks three times when the night mode is on. »» The OPTICAL INPUT indicator on the front panel of main unit blinks once when the night mode is off. Note •• This product supports Dolby Digital and LPCM. •• DTS is not supported. •• Sampling frequency: 32KHz, 44.1KHz, 48KHz 5.5 Auto Standby When playing media from a connected device, the SoundBar automatically switches to standby after 20 minutes if no audio play from a connected device. 5.6 Apply factory settings You can reset your SoundBar to the default settings programmed at the factory. 1 On your remote control, press LINE INPUT button. 2 Press MUSIC, VOL- and NEWS on remote control within 3 seconds to perform factory default settings. »» when the factory setting restore is complete, the system shuts down into standby mode and restart. EN 11