Sanyo FXCD-1350 Owners Manual - Page 20

ERROR SIGNS CD Player If a problem should occur while operating the built-in CD player, one of the following error signs may be displayed: Symptom E01 E07 E99 Cause Abnormal CD mechanism function. The disc was inserted incorrectly. The disc is dirty. The disc is defective. There is condensation on the optical lens. Internal connection check error. Solution Press the eject button. Turn the power off and then on again. If it is not corrected, contact the place of purchase. Insert the disc properly. Clean the disc. Use another disc. Leave the disc player off for an hour or so, then try again. Turn the power off and then on again. If it is not corrected, contact the place of purchase. CD Changer If a problem should occur while operating the connected CD changer, one of the following error signs may be displayed. Symptom E01 E07 no Cd Cause Abnormal mechanism function The disc was inserted incorrectly. The disc is dirty. The disc is defective. There is condensation on the optical lens. The magazine is not fully inserted into the changer. No discs in the magazine. Solution Contact the place of purchase. Insert the disc properly. Clean the disc. Use another disc. Leave the disc player off for an hour or so, then try again. Refer to the instructions supplied with the CD changer. Completely insert the magazine into the changer until it clicks into place. Load discs into the magazine. -19-