Sanyo HEC-DR7700BR HEC-DR7700 Owners Manual English - Page 11

MASSAGING (AUTOMATIC COURSES) 1 Press the OPERATION ON/OFF button. When the button is pressed, the lamp of the remote control illuminates and the sole warmer will turn on. When the foot rest is fully lowered, the foot rest will rise a little. When the massaging rollers are not located in the upper section, the massaging rollers will move to the upper section and stop. (During the movement, the characters of "ORIGIN" on the remote control flicker.) 2 Turn the sole warmer on or off. Sole warmer will be turned on or off each time the SOLE WARMER button is pressed. (The button is illuminated while the sole warmer is on.) If you feel that the sole warmer is too hot, turn it off by pressing the SOLE WARMER button. When the room temperature is low such as in winter, it takes some time to warm up or you may barely feel warm. 3 Adjust the positions of the back rest and the foot rest. (See page 13-15) 4 Press the desired Automatic Course button. NECK/SHOULDER LOWER BACK LOWER BODY COMFORT AIR COURSE Massages mainly the neck and shoulders. Massages mainly the waist and lower back. Air massage mainly on the legs and soles of the feet. Air massage mainly on the waist and legs. Lower Body can be operated simultaneously with Neck/Shoulder or Waist. Air Course cannot be operated simultaneously with any other courses. Refer to the page 28 regarding the massaging contents of Automatic Course. Change of course during massaging, or change to the Whole Body Sensor Automatic Course or the Manual Course, is possible. 5 Starts the massaging automatically. Measure the position of shoulder. Check if the position of shoulder is correct. If not, adjust the position using the POSITION ADJUST button. (See page 20) Starts the massaging of selected course. 6 Adjust the strength of massage. (See page 20) Finishes the massaging automatically by timer operation. The massaging rollers are moved to the upper position and are stopped automatically approx. 15 minutes after starting the operation. The buzzer sounds and the lamp on the remote control will turn off. To stop the massage during massaging operation. Press the OPERATION ON/OFF button. All the massaging will stop and the chair will be automatically brought to its home position. (The massaging rollers are moved to the upper position and remain in that position.) Press the button for the current operation. The massaging that corresponds to the pressed button will stop. (The Massaging rollers will stop at that point.) If you have felt abnormal physical sensation or want to stop the massager immediately Press the INSTANT STOP button. All the massaging will stop and the lamp of the remote control will turn off. When you want to restart massaging, press the OPERATION ON/OFF button. (The massaging rollers move to the upper position and remain in that position.) After the movement, repeat the operation from the beginning of each massage. 19 Measurement of shoulder position Measure the position of shoulder and match the position of massaging rollers to that of shoulder. Massaging rollers move up and down to measure the position of shoulder. (Sit deeply on the massage chair and raise your head slightly. The matching of the position of shoulders may not be possible if the head is leaning on the back rest.) Massaging operation at recognized position of shoulder. Check that massaging rollers match the position of your shoulder. If not, when the lamp of is flickering (a buzzer sounds), adjust the position by pressing the POSITION ADJUST button. (Remote control display) The massaging rollers are moved up or down by 0.4" each time the POSITION ADJUST button is pressed. When it is difficult to adjust with POSITION ADJUST button, move your body for adjustment. The height that can be adjusted is between approx. 59" to 70.8". Position too high Appropriate position Position too low Massaging rollers Decides the position of shoulder. Massaging operation and display of remote control Displays the aim of massaging positions, the type of massaging, body pressure and the remaining massaging time on the remote control. Explanation with an example of NECK/SHOULDER The position of current massage flickers Massaging neck/shoulder mainly Finishes the massaging by the operation of the timer. (After the massaging rollers return to the origin, the lamp on the remote control will turn off) Adjusting the strength of massage Each time the UPPER BODY STRENGTH ADJUST button is pressed, the strength of upper body massaging can be adjusted in five stages. (The strength is displayed by the lamp on the remote control.) Each time the LOWER BODY STRENGTH ADJUST button is pressed, the strength of lower body massaging (air) can be adjusted in three stages. (The strength is displayed by the lamp on the remote control.) NOTE When it is felt that the massaging on the soles or calves is too strong even when reducing the strength of lower body (air) massaging, put a towel etc. on those massaged parts. 20