Sanyo PDGDXT10L Owners Manual - Page 104
Cleaning the Filters, time to synchronize the Filter time display.
![]() |
UPC - 086483067556
View all Sanyo PDGDXT10L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
6. Maintenance Cleaning the Filters The projector uses three filters to keep the fans free of dust and other particles, and should be cleaned every 500 hours of operation. In dusty environments, it is recommended to clean the filters more frequently. If the filter is dirty or clogged, your projector may overheat. When the message below is displayed, the filters must be cleaned. Note: When the Please clean filter message is displayed, please clean or replace all three filters at the same time to synchronize the Filter time display. The Filter Message item should be enabled in the Options menu. Refer to Option on page 83. Refer to the following guide to clean the filters. 1. Lift the projector to expose the underside to locate the first filter. See the drawing on the right. Bottom view Note: Only clean the outside of the exhaust vents with a vacuum cleaner. 2. The left-side filter and intake grille (located in the rear) can be cleaned as demonstrated in the following images. 95
![](/manual_guide/products/sanyo-pdgdxt10l-owners-manual-9410fe8/104.png)