Sanyo PDGDXT10L Owners Manual - Page 50

(6) Turning off the Projector, On/Standby, Select

Page 50 highlights

3. Projecting an Image (Basic Operation) Turning off the Projector Once the projector is no longer required, it is important to shut it down correctly to avoid damage or unnecessary wear and tear to the projector. CAUTION • Do not unplug the power cable from the wall outlet or projector when the projector is powered on. Doing so can cause damage to the AC IN connector of the projector and (or) the prong plug of the power cable. To turn off the AC power supply when the projector is powered on, use a power strip equipped with a switch and a breaker. • Do not turn off the AC power supply within 10 seconds of making adjustment or setting changes and closing the menu. Doing so can cause loss of adjustments and settings and return to default. Refer to the following guide to shut down the projector. 1. Press the On/Standby button once. The Power Off window displays. 2. Press the On/Standby button or Select again on the OSD control panel or remote control to verify power off. The cooling fans continue to operate (cooling-off time). The cooling fans stop operating when the projector turns off. 3. The projector enters Standby mode and the power LED lights orange. 4. Press the Main Power switch to the off position (O) to turn off the projector. 41

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135

3. Projecting an Image (Basic Operation)
41
s
Turning off the Projector
Once the projector is no longer required, it is important to shut it down correctly to avoid damage or unnecessary wear and
tear to the projector.
CAUTION
Do not unplug the power cable from the wall outlet or projector when the projector is powered on.
Doing so can cause damage to the AC IN connector of the projector and (or) the prong plug of the
power cable. To turn off the AC power supply when the projector is powered on, use a power strip
equipped with a switch and a breaker.
Do not turn off the AC power supply within 10 seconds of making adjustment or setting changes
and closing the menu. Doing so can cause loss of adjustments and settings and return to default.
Refer to the following guide to shut down the projector.
1.
Press the
On/Standby
button once. The Power Off
window displays.
2.
Press the
On/Standby
button or
Select
again on the
OSD control panel or remote control to verify
power off.
The cooling fans continue to operate (cooling-off
time).
The cooling fans stop operating when the projector
turns off.
3.
The projector enters Standby mode and the power
LED lights orange.
4.
Press the Main Power switch to the off position (O)
to turn off the projector.