Sanyo PLC-ET30L RS232C Basic - Page 13
INPUT 2 Y,Pb/Cb,Pr/Cr Command
![]() |
UPC - 086483069925
View all Sanyo PLC-ET30L manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
PLC_ET30L Basic Serial Command Functional Specifications 6.22 DISPLAY CLEAR Command Command "C1E" [CR] Detail Clear On-screen Display under all conditions Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.23 BRIGHTNESS + Command Command "C20" [CR] Detail Increment Brightness by 1 according to user control. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.24 BRIGHTNESS - Command Command "C21" [CR] Detail Decrement Brightness by 1 according to user control. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.25 INPUT 2 VIDEO Command Command "C23" [CR] Detail Select Video input in Input 2 Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.26 INPUT 2 Y,Pb/Cb,Pr/Cr Command Command "C24" [CR] Detail Select Y, Pb/Cb, Pr/Cr input in Input 2 Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.27 INPUT 2 RGB Command Command "C25" [CR] Detail Select RGB input in Input 2 Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.28 IMAGE Command Command "C27" [CR] Detail Switch Image Setting status. Previous Image mode is displayed for 4 seconds by receiving first command. Image Mode gets switched by receiving another command while the display is on the screen. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 13/24
![](/manual_guide/products/sanyo-plcet30l-rs232c-basic-f22c816/13.png)