Sanyo PLC-ET30L RS232C Basic - Page 18

PLC_ET30L Basic Serial Command Functional Specifications 6.53 INPUT 1 DVI (AV HDCP) Command Command "C53" [CR] Detail Select DVI (AV HDCP) input of Input 1 Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.54 LENS SHIFT UP Command Command "C5D" [CR] Detail Move projection area upward. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.55 LENS SHIFT DOWN Command Command "C5E" [CR] Detail Move projection area downward. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.56 LENS SHIFT LEFT Command Command "C5F" [CR] Detail Move projection area leftward. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.57 LENS SHIFT RIGHT Command Command "C60" [CR] Detail Move projection area rightward. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 6.58 AUTO PC ADJ. Command Command "C89" [CR] Detail Execute AUTO PC ADJ. function This command works the same way as "AUTO PC" button of the remote control. Sending this command during Auto PC Adj. process terminates the operation. This is the same by "AUTO PC" button of the remote control. Acceptable [ACK] [CR] Response Unacceptable "?" [CR] 18/24