Sanyo PLC-HF10000 Network Setup - Page 42

Chapter 4 Controlling the Projector Setting 3 Item Description Edge blending.........Sets the seamless overlapping for multi-screen. (ON, OFF) Color matching...Corrects the details of color for multiscreen. (ON, OFF) Logo Sets on or off the logo display on the screen during the startup. (User, Default, OFF) Filter control........Scroll the filter. Click "Roll-up", a confirmation display appears, and then click "OK", the filter will be scrolled. Fan speed control...Sets the running speed for the cooling fans. (Normal, Max) Remote control....Selects the remote control code. (Code1 - Code8) Power management...Sets into the selected power management mode (OFF, Ready, Shut down) if the input signal is interrupted and no control key is pressed for the specified period of time. *The specified time can be set 1 to 30 min. Direct on Sets the power-on mode when the AC cord is connected to the outlet. Key lock Sets the prohibition of controls either Projector or Remote control. (OFF, Projector, Remote control) PJ lock suspend...When the projector has a security of PIN code lock, disable this function temporarily by pressing Execute button. Setting procedure 1. Turn off the projector , disconnect AC cord from the outlet and then connect AC cord again. 2. Access this page with the web browser. 3. Click Execute button on the PJ lock suspend. Shutter Sets the shutter operation. (ON: close, OFF: open) Shutter management...Sets the shutter management operation. Effect Sets the effect to fade in or out at opening or closing the shutter. (OFF, L1, L2) Release key......Sets available keys to release the shutter. (Any, SHUTTER) Time Sets the specified period of time when the projector shuts down after the projector is left with the shutter closed. * The specified time can be set 5 to 480 min. 42