Sanyo PLC-SW35 Owners Manual - Page 39

Setting Setting Logo PIN code lock This function prevents an unauthorized person from changing the Logo setting. Off . . . . .the Logo setting can be changed freely from the Logo menu. (p40) On . . . . . .the Logo setting cannot be changed without the Logo PIN code. If you want to change the Logo PIN code lock setting, enter a Logo PIN code along the following steps. The initial Logo PIN code is set "4321" at the factory. Enter a Logo PIN code Select a number by pressing the Point 7 8 button and fix the number with the SELECT button. The number will change to "✳". If you fixed a wrong number, move the pointer to "Set" or "Clear" once by pressing the Point d button, then return to "Logo PIN code". Enter the correct number again. Repeat this step to complete entering a four-digit number. When the four-digit number is fixed, the pointer will automatically move to "Set". Press the SELECT button so that you can change the Logo PIN code lock setting. If you entered a wrong Logo PIN code, "Logo PIN code" and the number will turn red and disappear. Enter a correct Logo PIN code all over again. Change the Logo PIN code Logo PIN code can be changed to your desired four-digit number. Select "Logo PIN code change" with the Point d button and press the SELECT button. Set a new Logo PIN code. Be sure to note the new Logo PIN code and keep it at hand. If you lost the number, you could no longer change the Logo PIN code setting. For details on PIN code setting, refer to relevant instructions of the PIN code lock function on page 43. Logo PIN code lock Logo PIN code lock Dialog Box After a correct Logo PIN code is entered, the following dialog box will appear. Pointer Select On/Off by pressing the Point 7 8 button or change the Logo PIN code. 39