Sanyo PLC-SW35 Owners Manual - Page 42
To change the code of the projector, Remote control, Key lock
View all Sanyo PLC-SW35 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Setting Remote control This projector has two different remote control codes; the factoryset normal code (Code 1) and the secondary code (Code 2). This switching function prevents remote control interference when operating several projectors or video equipment at the same time. When operating the projector in "Code 2", both the projector and remote control must be switched to "Code 2". To change the code of the projector : Set the remote control in the Setting menu to "Code 2." To change the code of the remote control : Press and hold both MENU and IMAGE buttons on the remote control together for 10 seconds or more. After changing the code, make sure the remote control operates properly. To return to the normal code (Code 1), operate both the projector and remote control in the ways above again. ✔Note : When battery of the remote control is replaced, the remote control code automatically returns to the normal code (Code 1). RemCOoMPtUeTEcR oVnItDrEoOl ON-OFF Press and hold MENU VOLUME- SELECT VOLUME+ MENU and IMAGE buttons for 10 seconds or more. D.ZOOM KEYSTONE IMAGE NO SHOW FREEZE AUTO PC P-TIMER MUTE Key lock This function locks operation of the top control and remote control. It is useful to prevent operation by an unauthorized person. ···· not locked. ···· locks operation of the top control. To unlock, use the remote control. ···· locks operation of the remote control. To unlock, use the top control. If the top control accidentally becomes locked and you do not have the remote control nearby, disconnect the AC power cord from the AC outlet, and then with pressing the SELECT button, reinsert the AC power cord. This will cancel the top control lock. Key lock Select Key lock and this box appears. Choose one of these with the Point ed button and select [Yes] to activate it. 42