Sanyo PLC-XW56 Owners Manual - Page 26

Computer Input Computer System Selection This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or UXGA with its Multi-scan system and Auto PC Adjustment. If Computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional setting. (Signal formats provided in this projector is shown on page 61.) One of the following messages may appear when: Auto The projector cannot recognize the connected signal conforming to the provided PC Systems. The message "Auto" is displayed on the PC System Menu icon and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required. (p.28, 29) ---- There is no signal input from computer. Check the connection between your computer and the projector. (See "Troubleshooting" on page 56.) Mode 1 The preset system is manually adjusted in the PC Adjust Menu. The adjusted data can be stored in Mode 1 ~ 5. (p.28, 29) SVGA 1 PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it. *Mode 1 and SVGA 1 are examples. PC System Menu The Auto PC Adjustment function operates to adjust the projector. Selecting Computer System Manually PC system can also be selected manually. 1 Press the MENU button to display the On-Screen Menu. Press the Point ▲▼ buttons to move the red framed pointer to the PC System Menu icon. 2 Press the Point ed buttons to move the red arrow pointer to the system that you want to set, and then press the SELECT button. PC System Menu The PC System Menu icon Selected system is displayed. Systems on this dialog box can be selected. Custom Mode (1 ~ 5) set in the PC Adjust Menu. (p.27, 29) 26